Search results

Would i use the combined series voltage?

I have 4 series strings of 8 455 w panels. 9.27a They are 125 feet from my house. What will my voltage drop be on 10g thhn?

Has anyone used wolf fang anchors to secure mounting to the ground

Came to say this. Fork connectors ftw

In wiring a split phase totally off grid system, what are the benefits of using a 60a breaker instead of just wiring the 2 hot leads directly to the main breaker?

Do i need a fuse for each inverter

Where would you suggest putting the fuse

No fuse yet. But am going to fix that

It is directional so now i am confused. which is line and which is load. I feel like the inverter side is load...

I….don’t….know. Checking now

Ok, hanging inverters. Got the 1st one wired to bus bar. No power coming in yet obviously. Anything wild here?

Yeah, the plan is to drive them 36 to 48 inches and use 1 post per leg of the brightmount. 32 posts in all.

I have 8 of the eg4 Brightmount racks and we have a farm and a bunch of 8" treated fence posts. If i drove them into the ground with a pto post driver, do you all figure that would be sufficient mounting surface?

1/0 to busbar and 4/0 to Battery

I purchased 2 eg4 6500’s from signature solar and they came with 1/0 cables to go from inverter to bus bar. Will’s video says 2/0. Do i need to purchase 2/0 cable

Do I have to segregate my loads from my inverters as shown in the pic? This will run my entire home and i am having trouble keeping all my loads on the spaces to the left.

I didnt realize that was saying they are independent of each other. Thank you for the clarification

I cant find info on if the mppt inputs on the inverters are independent

On my eg4 6500s, I can connect 2 strings of panels. Can I do 7 and 8, or should I just do 7 & 7

The bus bars i have are rated 250 amps. I am running 2 x 6500EX and 6 eg4 batteries. Max charging amps are 120. With fluctuation, are my busbars too small?

I could get away with 3/4hp honestly

I have a 2hp, 10.2a 1500watt ac well pump installed. I would like to retrofit it to run on solar but I have couple of questions. Static water level is 60ft and pump is set at 135 ft. 1. Could i just create its own mini-grid with 2000w of panels and a 3kw all in one? 2. RPS makes a retrofit...

I meant if I did. I have 14k in panels for 2 inverters. Just making sure on my calculations.

So am i correct in assuming that with every hour of sunlight under perfect conditions i should be able to bank/use 6500 watts per hour using an all in one rated for 6500 watts. I dont know why this just popped into my head

I already have 2 EG4 6500s in split phase. How would I add a 3rd? And will it still remain as split phase

I guess I’m just asking if that’s a real thing

Building off grid. Is there a solar pump kit with its own battery back up? 3 bed 3 bath home if that helps.

Would you wire the inverter generator to both ac inputs on the aios

Perfect. Thank you

PV MPPT Voltage Range 90vdc - 450vdc Start up voltage is 80v

https://signaturesolar.com/eg4-6-5k-off-grid-inverter-6500ex-48/

I am not sure what the range is, it just tells me 500vdc. I am assuming 250 per mppt since they both have 2

Here's the situation, and sorry if this is the wrong forum, 30 x 445w panel 49.5voc 11.44isc Going into 2 eg4 all in ones 6500ex (8000w in, 500voc) each. My plan is to split into 2 sets of 15. Wire 5 panels in series, and paralell 3 groups for each inverter. Does this make sense?

Just verifying my understanding. I’m new

And then into another bus?