Search results

Hey guys, I'm using 2 of the BluePower SP6548 SOLAR INVERTER and 6 of the EG4 (48V/100AH) LL Battery. The inverters switches to the grid mode when the batteries runs out of power (0% SOC). How can I make my inverters switch to grid mode when the batteries are about 10% of charge? Please see...

Signature solar only has Communication Hub for the LifePower4 batteries, not for the EG4 batteries. My inverters doesn't support my EG4 battery protocol. So I guess I'm stuck with what I have :( Thank you for the help. I guess it was my fault for not checking before building my first solar...

Hi Guys, I'm using 6 batteries EG4 batteries and 2 of the SP6548 inverters split phase. (attached manuals to this email) I'm following the manual and using the ethernet cable, but I can't get to make them communicate with each other. I would like for the inverters to read Sate of Charge on...

Yes, it's enough. I have 30KW Battery capacity.

I cleaned the panels today, and I was able to get 6KW MAX in full sunlight. Still missing 1.8KW according to the rating on the panels, but not sure if that's normal.

Hey guys, I have 2 of the BluePower SP6548 SOLAR INVERTER. I installed 20 panels of CS3N - 395MS. On paper, each solar panel generates 395W with full direct sunlight. That means 7,900W in total. All panels are on the same roof at the same angle. I have 2 inverters split phase, and at max...

Hello everyone, My normal public electrical pole provides 240V 150A Single phase to my home. I just installed off-grid solar panels and I'm using 2 of the BluePower SP6548 SOLAR INVERTER. Can I use my 2 inverters and provide power to my home using split-phase? (L1 and L2) is this safe? Will I...

The inverters should be Synchronized. The 4 cables of communicated and current share are all connected. the manual states that you can connect the inverters parallel or in multiple phases. Please see attached document.

But I don't want split-phases from my off-grid system. I want single-phase Electricity. The normal Electricity that I get from the public utility pole is single-phase. Please see attached document.

Hello Everyone, I have 2 of the BluePower SP6548 SOLAR INVERTER. I'm getting Fault 72 and I can't get 240V between both of the poles. The voltage of each POLE of the Electric Panel is 120V but the voltage between both poles is NOT 240V. I have also attached a video to this email. I get Fault...