Search results

There is a guide in the manual.

Not really sure what happened but mine is up to date. I tried 2 times and it would not go to latest. DM'd eg4 on here and he took my serial and told me to try again and it worked.

My problem is I have 3 Lifepower and 2 LL-s so I gave up and am just using 2 wall mounts. I will use the rack mount batteries for an outbuilding we are building.

You have to have the switch, next to the dongle, off while changing that setting.

I see the same on mine.. no option to update

I only have a R485 USB to RG45 Can I use that with pins 4 and 5?

@EG4_Jared can you help with this? Is there a battery firmware update?

I have a similar issue but I am using 2 6000XP with 2 indoor units. Cycle count is different. They were perfectly balanced when I set everything up.

I used one from harbor freight HF Lift

Has anyone had any luck getting solar assistant to work with the EG4 wall mount batteries?

Both of mine show 2.02

Wounder why they used screw terminals on the 6000XP vs the spring clamps?

I can confirm that wiring AC to the master only does NOT work. Both have to have Grid connected.

System 2x 6000Xp 2 EG4 indoor wall mount Has been running our 45' motorhome just fine till today (of course while I was out) when the wife called to say power was out. EG4 monitor showed everything fine but when I got home, the motorhome showed L1 176v L2 236v. Went out to equipment and it...

I had the same issue but with R&L. SS took care of it quickly.

Since the MPPT's are good for 4000w, is it a waste to do 2 strings of 3700w in parallel? Out of controllers and need more solar.

I have 4 Brightmounts mounted on 6x6 posts (no concrete) and have not had an issue. I had to use the extension but I looked at the manual before ordering to make sure my panels would fit first. Mine are only 2' out of the ground so that is a big difference. We just a strong storm with gusts of...

They are

I received y first 6000xp about 3 weeks ago and it updated fine to the correct version ccaa-180C0D. I just installed a new one and when I updated it, it shows ccaa-180C0C as the firmware. 2 Station name Device type Battery type Power Rating Firmware Status Connect Status...

I am trying to get this to work but my cable I made to communicate with the LL-S batteries does not work. I can not find the post that EG4jarred posted with the pins used for different EG4 products for both CAN and RS485.

Yea I have the 6000xp just never saw the 12k.

This is a clamp style breaker. The serrated "clamp" tightens the wire when the screw is tightened. The screw type would just be the screw pushing the wire .

I think it would be a better option if SS or other vendors offered a trade in from the lifepower or LL to the indoor (or outdoor) since they are not compatible with the indoor units. I have 3 lifepower4 and 2 ll-S so I can not use any of them to supplement my 2 indoor units I just installed.

When installing my EG4 indoor batteries I noticed in the manual there are 3 EG4 inverters pictured. 18k, 12k, and 6000xp. Any idea when these will be available?

The clamp style lifts a clamp up when tightening whereas the screw type, when you tighten the screw, the screw is pushing on the wire.

I just installed my 2nd 6000xp and did the firmware update. When completed it shows an older version than the first one I commissioned around a month ago. The new one updated to ccaa-180C0C while the other shows ccaa-180C0D

Just opened my new indoor EG4 battery and dip switch 1 is broken off. Vendor has offered to return/replace or I can keep it and let them know what I think the value of credit should be. They said will not affect the warranty. I can probably switch it on of off with a small jewelers...

The wall mount is for tip hazard

Thanks for the info

i just received and have started to install a pallet of Aptos 370W Bifacial Solar Panels from SS. The VOC is 41.4 and ISC is 11.26. Are the panels in 10s ( in South Carolina) too much for the EG4 6000XP with 480v mppt?

Thats what I was thinking. On the DC side , do to cost, people often double up on smaller gauge cables.

Is it an option to run 2 6000xp's to the input of a 100a sub panel main feed, instead of running to 2 sperate breakers since the load is already protected by the load breaker already in the unit?

Each bracket has an adjustable leg. Does take some work to adjust it once installed.

I have 2. 1 with their 195w panels and 1 with 3 400w bifacials. I have to extend the rails a bit but they have been working fine in western South Carolina for almost a year. I used sonotubes with a few bags of concrete. The one that has 3 big panels actually sits about 2' above ground. The...