MisterSandals
Participation Medalist
Still, i think voltages should be checked at rest. My comment was implying measuring at a high state of charge (peak charge "state", to use sunshine_eggo's wording).By this do you mean to check cell voltage differences when charging is at or almost at the set absorption voltage? It’s set at 14.0V in my case.
Your battery, as pictured in post #17 is very close to fully charged 13.4V at rest, and with a voltage difference of .007mV (thats 7/1000ths of a volt), its doing just fine. Better than just fine, its doing great.