2S1P voltage and current
- Thread starter FlyingT
- Start date
timselectric
If I can do it, you can do it.
- Joined
- Feb 5, 2022
- Messages
- 20,090
The panels don't care how you connect them.
The SCC (Solar Charge Controller) is what you have to configure to.
The SCC (Solar Charge Controller) is what you have to configure to.
Last edited:
dopeassjackson
New Member
Ohms law.
In your case 2x the volts and the same amps.
In your case 2x the volts and the same amps.
Sergio95050
SE SW digger
Practically you can, but diodes in that one panel would be closed by higher voltage from those two 2S panels [49Vdc]; so, it will not produce any energy at all. Dummy panel per se.
Bob142
Build more, learn more.
I find this reference instructive for mix and match scenarios:
solarpanelsvenue.com
Mixing solar panels – Dos and Don’ts • SOLAR POWER SECRETS
Mixing Solar Panels: Discover Now Dos and Dont's of Mixing the Same Types or Different Types of Solar Panels. Act Now to Save Your Money!
solarpanelsvenue.com
mikefitz
Solar Wizard
- Joined
- May 28, 2020
- Messages
- 3,221
All 3 in series, Voc 73.5 volts, Imp 4.95 amps.
All 3 in parallel., Voc 25.4, Imp 14.85 amps.
No other useful option.
Yes you are correct. My can not connect is simply a matter of not worth connecting that way.
Sergio95050
SE SW digger
Mismatching panels (different voltages) pictured correctly only for that type, what have no diodes ! Else, see post#5.
timselectric
If I can do it, you can do it.
- Joined
- Feb 5, 2022
- Messages
- 20,090
I missed the "3 panels" part.
2s1p is only 2 panels, and that's what I went by.
So, no...... don't do that.
2s1p is only 2 panels, and that's what I went by.
So, no...... don't do that.
Similar threads
