ButcherCarl
New Member
Im setting up a 12V solar system for my RV.
I have 4 separate batteries with a BMS on each battery.
Victron Multiplus II 12v 3000VA 120A
Im asking if I can attach each battery separately to the Lynx Distributor, or do I have to wire all the batteries in series, basically making one big battery, and attaching the one big battery to the Lynk Distributor?
I want to attach them all separately. My BMSs are all JBD 4s. 2 of them are 150A and 2 of them are 200A.
The batteries are, 2 of them are 304Ah, and 2 of them are 302Ah.
Can you make one big battery with 4 separate BMSs, or would I have to buy a new BMS that is 16s?
Im confused because, if you get say 4 100Ah battle borns, they would all have their own separate BMS, and you wire them all in series, right? So you should be able to do it with 4 separate DIY batteries, correct?
This isnt all of the system, Im just laying it all out, figuring out where I want to put the Cerbo GX, the Shunt, etc, and the display.
I want to get the batteries figured out, before I go any further figuring out where I want the rest of the components.
I have 4 separate batteries with a BMS on each battery.
Victron Multiplus II 12v 3000VA 120A
Im asking if I can attach each battery separately to the Lynx Distributor, or do I have to wire all the batteries in series, basically making one big battery, and attaching the one big battery to the Lynk Distributor?
I want to attach them all separately. My BMSs are all JBD 4s. 2 of them are 150A and 2 of them are 200A.
The batteries are, 2 of them are 304Ah, and 2 of them are 302Ah.
Can you make one big battery with 4 separate BMSs, or would I have to buy a new BMS that is 16s?
Im confused because, if you get say 4 100Ah battle borns, they would all have their own separate BMS, and you wire them all in series, right? So you should be able to do it with 4 separate DIY batteries, correct?
This isnt all of the system, Im just laying it all out, figuring out where I want to put the Cerbo GX, the Shunt, etc, and the display.
I want to get the batteries figured out, before I go any further figuring out where I want the rest of the components.