DC to DC wiring with RSD/Optimizer to a Sol-Ark

[Danke]

​

I am buying these for my Sol-Ark 15k, but I’m not familiar with wiring (first solar project).

They sell two versions:

Enteligent NMax RSD + Optimization M900A1-M4 (Staubli MC4 connector)
Enteligent NMax RSD + Optimizer M900A1-S4 (BizLink S418 connector MC4-compatible)

Any guidance on the type of connectors I should go with?

Thanks!

 

[Wet1]

I would contact their TS and give them your panel info if you're in doubt. My guess is you'd want the std MC4 connector model, assuming that's what your panels have on them.

This is the first I've seen of these optimizers, they look interesting for those with shading issues. Are they pricey?

 

[Danke]

Ya, their correspondence is not good. Still waiting for answer(s).

Depending on connections:

$65-$70.

https://enteligent.com/shop

My panels:

https://signaturesolar.com/content/documents/BLUESUN/BSM460M-72HBDspec.pdf

 

[Wet1]

Ya, their correspondence is not good. Still waiting for answer(s).

Depending on connections:

$65-$70.

https://enteligent.com/shop

My panels:

https://signaturesolar.com/content/documents/BLUESUN/BSM460M-72HBDspec.pdf

Sounds reasonable.

Those panels appear to take MC4 connectors.

 

[Danke]

Here the CEO talks about them:

https://enteligent.com/webinars

 

[hpeyerl]

Here the CEO talks about them:

https://enteligent.com/webinars

Just curious if you managed to actually buy these Enteligent things? Looks like they've gone unobtainium?

 

[Danke]

Just curious if you managed to actually buy these Enteligent things? Looks like they've gone unobtainium?

No, my whole system has changed. I’m going totally off grid, so don’t need optimizers/RSD.