PaulLad
New Member
- Joined
- Jul 14, 2020
- Messages
- 169
This is a tiny 48V system. The reason I went with 48V is I have a gas gen and am getting the chargeverter for backup.
See attached photo for components and let me know what's wrong with my fuses and wire sizes.
500 watt inverter @ 48V = 10A = 14 ga wire & 15A fuse
20A charge controller = 30A circuit breaker & 12 ga wire
not sure how to size the wire to and from the stepdown converter. Its 40 amps so I would assume 8 ga wire but obviously Will didn't use big wire.
everything else: 14 ga wire
Thanks for any insights!
See attached photo for components and let me know what's wrong with my fuses and wire sizes.
500 watt inverter @ 48V = 10A = 14 ga wire & 15A fuse
20A charge controller = 30A circuit breaker & 12 ga wire
not sure how to size the wire to and from the stepdown converter. Its 40 amps so I would assume 8 ga wire but obviously Will didn't use big wire.
everything else: 14 ga wire
Thanks for any insights!