OffGridForGood
Latest activity Postings About Most reacted threads Most reacted posts
-
-
OffGridForGood reacted to agtcovert's post in the thread EG4s are too pricey. Alternatives? with
Like.
I'll send my 3rd ASP to you to test this, for science, I just want an ASP back. With the amount of battery you have, plus 3 of the... -
OffGridForGood replied to the thread Victron equipment for off grid use in Ontario, Canada.What "price advantage" is that? SolArk is a Deye inverter sold under exclusive distribution agreement for N.America, at 3x the price of...
-
OffGridForGood reacted to dougbert's post in the thread Fire risk of common NEMA 14-50 outlets with Like.
good question. under 3 hours, you can hit 50 amps for over 3 hours 40 amps max (80% rule applies) to get 48 amps for 3+ hours, then...
-
OffGridForGood reacted to Rednecktek's post in the thread What lessons have you learned working with solar? with
Haha.
Easier than understanding women or teenagers. 😜 -
OffGridForGood reacted to 42OhmsPA's post in the thread Whats the highest production you've ever seen out of your array? Single point or total kWh with Like.
Yesterday may have been a record for my 14.55kW of panels. A MWh could happen this month, Tues is supposed to be crap but the rest of...
-
OffGridForGood replied to the thread Dead short fuse trip experiment using an MRBF fuse.WOW A Whole Lot of Blue ! Where is @sunshine_eggo !!?? :ROFLMAO:
-
OffGridForGood reacted to timselectric's post in the thread Tim's build thread (get off my lawn) with
Love.
Both systems made it to 100% and fully balanced. I wasn't here for it, because I had to do a little job. -
OffGridForGood reacted to upnorthandpersonal's post in the thread Dead short fuse trip experiment using an MRBF fuse with Like.
Same issues as what I mentioned in #109. The 85mm length is a bad thing for battery applications. They're just not meant for batteries...
-
OffGridForGood replied to the thread SRNE HESP no CT power reported.I have tall trees along the East property line, so my Solar is hit and miss until 10:00 AM each day, due to the branches/trunks causing...
-
yeah those dip could be clouds, same from my graph, starting of the day and the end of the they was cloudy. At first, I was thinking...
-
OffGridForGood replied to the thread Victron equipment for off grid use in Ontario, Canada.If you use the roof for PV mounting - then there are two more you need to worry about: Rapid Shut Down (RSD) CEC 64-218, and Arc Fault...
-
OffGridForGood reacted to sunsurfer's post in the thread Victron equipment for off grid use in Ontario, Canada with Like.
I'm on my 3rd year 100% off-grid and by far my Victron gear is my favorite. Hope you can work it out with the local oppressors.
-
OffGridForGood reacted to Skythings's post in the thread Starting Construction My New System- Rural Calgary, Alberta Canada with Love.
It's been awhile since I updated. This past January the weather in the Calgary area was very mild and it allowed me to work on my...
-
OffGridForGood reacted to timselectric's post in the thread SRNE 20KW parallel ASP journey. with Like.
I had a great day. Made 80kwh Which is pretty awesome for February
-
Plasma cutter that is a combo wire, stick, tig welder is only a few hundred...so we'll within diy prices.... sure it is limited to only...
-
OffGridForGood replied to the thread BMS connections.And Why the Pigtails are so impossibly short ! is even more bewildering !! :eek:
-
OffGridForGood replied to the thread Odd SOC activity.We really need to keep in mind the BMS SOC is a guess-o-meter at best, and a misleading 'red herring' at worst. After doing all we can...
-
And then we complain about the piss poor job BMS's do at reading low power levels while are shunt reads it all. Screenshots seconds...
-
OffGridForGood replied to the thread Odd SOC activity.And: To "know" the overall ESS SOC, most of us go with a Shunt - due to notoriously in-accurate BMS SOC information, but then we fret...
-
I do prefer to have the ability to cut off a battery with a breaker from the bus bar if needed.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…