I have a Roadtrek Zion RV. Currently fitted with 275w solar panels 400 ah lithium batteries, an e lever tracer with mt50 control.
It all works well except the setup mis-recognizes the system voltage and drops out of boost too quickly.
The mt50 reads 13.5v while other devices report 13.0v
This doesn’t meet my needs when boondocking as my average hourly draw is about 5 and the solar only outputs about 0.1 amps in trickle mode.
After overnighting, the mt50 reads the voltage correctly and will produce 5-8 amps until again prematurely switching to trickle.
Any ideas what’s going on?
Thanks
It all works well except the setup mis-recognizes the system voltage and drops out of boost too quickly.
The mt50 reads 13.5v while other devices report 13.0v
This doesn’t meet my needs when boondocking as my average hourly draw is about 5 and the solar only outputs about 0.1 amps in trickle mode.
After overnighting, the mt50 reads the voltage correctly and will produce 5-8 amps until again prematurely switching to trickle.
Any ideas what’s going on?
Thanks