pollenface
Solar Addict
I have a spare 700w turbine, spare 20a PWM turbine charge controller, spare 600w MPPT grid tied inverter and a spare 3S lipo BMS.
I could have 3x 18650's hovering around 10v (3.33v each) connected to the inverter (which operates with voltages between 10v & 32v). When power is supplied by the turbine, it's burned up almost immediately by the inverter but the 3x 18650's would act as a stabilizer for the turbines' output.
I think this concept has potential as running an MPPT directly from a full bridge rectifier only works intermittently as they keep falling out of sync with each other.
I could have 3x 18650's hovering around 10v (3.33v each) connected to the inverter (which operates with voltages between 10v & 32v). When power is supplied by the turbine, it's burned up almost immediately by the inverter but the 3x 18650's would act as a stabilizer for the turbines' output.
I think this concept has potential as running an MPPT directly from a full bridge rectifier only works intermittently as they keep falling out of sync with each other.