I signed up to the forum just to add this....
What is is? hours of me rambling as I hack my way through using an E2000LFP to power my entire house.
Long story short, it's an awesome unit, it does not surge over 2000W worth a poop, the internal fan mounted to the heat sink is the crappy one that makes all the bad bearing noise. I have no regrets about using this unit the way I did. It was always a TEMPORARY solution to my immediate problem.
I now have a 3KW BlueSun inverter hooked up to the same LiFePo4 cells, with another rack battery of similar size.
The next time I do this, I will stay the heck away from "all in one" type solutions. I will use an inverter for only inverting, and use MPPT charge controllers for only charging, and so on.
My problem with the Pecron was I would loose solar charging when I wanted to top up with the generator. My problem with my current BlueSun inverter is that I have to power the entire house with the generator when I want to top up with the generator, but the generator does not do 3KW.
Anyhow, good luck. The is also a new E3000LFP out with WiFi and all the bits. My BlueSun came with a WiFi dingle thing, it's garbage, the app is stupid crap and basicly usless for anything. The Pecron display was better than the BlueSun display too. All I want to see is SOC, Load, and PV input. Why is that so hard???