Hello there.
I have a single 100Wp solarp panels connected to Epever LS1024BP PWM SCC. The max amp of the SCC itself is 10A. The SCC is connected to a 12V 100Ah VRLA battery. There is no load connected to the system. Just panel, SCC, and Battery.
When i tried to read the current value from the SCC using the RS485, the value is always below 1 amp even at peak sun hour. Tried to measure with multimeter as well and showing the same results. This is a recurring problem with all the PWM SCC i tried. Is something im doing wrong?
Thanks
I have a single 100Wp solarp panels connected to Epever LS1024BP PWM SCC. The max amp of the SCC itself is 10A. The SCC is connected to a 12V 100Ah VRLA battery. There is no load connected to the system. Just panel, SCC, and Battery.
When i tried to read the current value from the SCC using the RS485, the value is always below 1 amp even at peak sun hour. Tried to measure with multimeter as well and showing the same results. This is a recurring problem with all the PWM SCC i tried. Is something im doing wrong?
Thanks