chadjones99
chadjones LLC
need help setting up set points on Victron smart solar 100/30 ( 12v)
I have two victron 100/30 charge controllers on a 500 AH Lipo battery bank
on one 100/30 I have ( 3 ) 185 panels which I have seen 420 watts at 29 amps on
and on the 2nd system ( 2 ) 185 panels which show up to 217 watts ( just add these so it hasn't been a full day yet )
anyway I got something jack up on the settings on the 1st system cause it goes straight to absorption and doesn't put the for 400 plus watts out to the battery ( which by the way are on 30% sc ) it likes to go around 180 watts then backs off
while the 2nd system stays in bulk.... how can I get the 1st charge control to stay in bulk I know the batties are not charged yet so it should be in bulk....
I have two victron 100/30 charge controllers on a 500 AH Lipo battery bank
on one 100/30 I have ( 3 ) 185 panels which I have seen 420 watts at 29 amps on
and on the 2nd system ( 2 ) 185 panels which show up to 217 watts ( just add these so it hasn't been a full day yet )
anyway I got something jack up on the settings on the 1st system cause it goes straight to absorption and doesn't put the for 400 plus watts out to the battery ( which by the way are on 30% sc ) it likes to go around 180 watts then backs off
while the 2nd system stays in bulk.... how can I get the 1st charge control to stay in bulk I know the batties are not charged yet so it should be in bulk....
