Hi all, new to the forum here.
I just purchased a SPF-6000T-DVM-MPV 6kW Growatt inverter, everything looks awesome so far and I am already installing the inverter at home.
I am wondering if you guys can guide me with the BMS selection, (if I really need one), I am wondering which BMS would work with the inverter based on the batteries I have. My current battery setup is as follow.
I will be using 10 Lithium Ion battery modules, (LG CHEM MB 12S 44V 20AH 880WH, each module have 12 Lithium Ion cells in a 12S configuration with an output of 20AH and 880WH. The 10 modules are connected in parallel having a total output of 200AH and 8.800WH. I am well aware that this is not the optimal batteries for my inverter but I already had these modules around for a different project and would like to give them a try.
Can I connect the batteries to the inverter without a BMS? Is there a BMS you guys know that can work fine with the inverter and good for this battery configuration?
I am building this setup to give power to my house when the grid is down, will be using a gas generator when batteries need to be charged and grid is not able, next step will be to add a solar panel set on the roof to keep batteries charged when needed without the use of the grid.
Thanks!
Milko Migneco
I just purchased a SPF-6000T-DVM-MPV 6kW Growatt inverter, everything looks awesome so far and I am already installing the inverter at home.
I am wondering if you guys can guide me with the BMS selection, (if I really need one), I am wondering which BMS would work with the inverter based on the batteries I have. My current battery setup is as follow.
I will be using 10 Lithium Ion battery modules, (LG CHEM MB 12S 44V 20AH 880WH, each module have 12 Lithium Ion cells in a 12S configuration with an output of 20AH and 880WH. The 10 modules are connected in parallel having a total output of 200AH and 8.800WH. I am well aware that this is not the optimal batteries for my inverter but I already had these modules around for a different project and would like to give them a try.
Can I connect the batteries to the inverter without a BMS? Is there a BMS you guys know that can work fine with the inverter and good for this battery configuration?
I am building this setup to give power to my house when the grid is down, will be using a gas generator when batteries need to be charged and grid is not able, next step will be to add a solar panel set on the roof to keep batteries charged when needed without the use of the grid.
Thanks!
Milko Migneco