Hi all, i've got a 4/5kW 48V Selectronic off grid setup and i've just gone through the process of setting up a new lithium battery bank so had to go through and recalibrate all the charge settings etc. It's all been working perfectly for the last 3-4 months or so except one issue. The SOC on the inverter isn't resetting to 100% when float is triggered from the charge reg. It's plugged in to the Digital 1 port, i am getting an LED light when the signal is on and the float light is coming on on the inverter to say it's hit float but the SOC isn't resetting back to 100%... it just sits there at 0% (as it only counts outgoings not the charge reg in-comings so over a few days it just tends to 0%). I can not for the life of me figure this one out... i've spent quite some time going through settings etc to figure out what's amiss but i'm empty handed! Any input would be greatly appreciated! 
