xPatrikPvP
New Member
- Joined
- Aug 2, 2020
- Messages
- 19
I upgraded my solar system from my old 14S20P 18650 li-ion build to a 16S 125AH LiFePo4 battery built with raw cells. The old battery was only about 18AH!
Cells (16X) https://eu.nkon.nl/rechargeable/lif...25a-prismatic-125ah-lifepo4-3-2v-b-grade.html
BMS (reused from old battery): JK-BD6A20S10P
Other system components:
Victron MultiPlus-II 48/3000/35-32
Victron SmartShunt 500A
Victron BlueSolar Charger MPPT 150/45 rev3 (6x 285W, 6x 225W panels)
Aliexpress Grid-Tie PVGS 180W (1x 100W panel)
Aliexpress Grid-Tie PVGS 350W (1x 285W panel)
ACS712 30A + Arduino Nano for dedicated DC-System meter
3x DS18B20 Temperature sensors + Arduino Nano for 3x Temperature sensors
Raspberry PI 3 B+ with venus os acting as venus device for victron vrm monitoring
Edit: Here is a vrm share link if anyone wants to check how the system is doing (https://vrm.victronenergy.com/installation/191449/share/5632938d)
Cells (16X) https://eu.nkon.nl/rechargeable/lif...25a-prismatic-125ah-lifepo4-3-2v-b-grade.html
BMS (reused from old battery): JK-BD6A20S10P
Other system components:
Victron MultiPlus-II 48/3000/35-32
Victron SmartShunt 500A
Victron BlueSolar Charger MPPT 150/45 rev3 (6x 285W, 6x 225W panels)
Aliexpress Grid-Tie PVGS 180W (1x 100W panel)
Aliexpress Grid-Tie PVGS 350W (1x 285W panel)
ACS712 30A + Arduino Nano for dedicated DC-System meter
3x DS18B20 Temperature sensors + Arduino Nano for 3x Temperature sensors
Raspberry PI 3 B+ with venus os acting as venus device for victron vrm monitoring
Edit: Here is a vrm share link if anyone wants to check how the system is doing (https://vrm.victronenergy.com/installation/191449/share/5632938d)
