Hi all
After a bit of advice for the strange system I’ve built please.
Current set up.
60ah 24v lifepo4 (Another to be added when finances allow)
Vevor all in one 3kw
Victron 100/15 mppt
Victron 24/12 converter
Victron battery smart
Renogy shunt
2x100w Mono PV as below.
5.51 imp
18.15 vpm
21.45 voc
5.90 isc
Please see screenshots from today, my plan is to add another 2x100w pv which I already have and planned to do 2s 2p currently have them in series, should I have any concern with my plans, I briefly saw 210w from the PV whilst driving today on the status screen and hit 7amps when I saw it, weather was typical UK reasonably sunny day and about 20c.
It appears the status doesn’t match the trends, so in short any issue to add the other two panels on?
Thanks very much.
Nick
After a bit of advice for the strange system I’ve built please.
Current set up.
60ah 24v lifepo4 (Another to be added when finances allow)
Vevor all in one 3kw
Victron 100/15 mppt
Victron 24/12 converter
Victron battery smart
Renogy shunt
2x100w Mono PV as below.
5.51 imp
18.15 vpm
21.45 voc
5.90 isc
Please see screenshots from today, my plan is to add another 2x100w pv which I already have and planned to do 2s 2p currently have them in series, should I have any concern with my plans, I briefly saw 210w from the PV whilst driving today on the status screen and hit 7amps when I saw it, weather was typical UK reasonably sunny day and about 20c.
It appears the status doesn’t match the trends, so in short any issue to add the other two panels on?
Thanks very much.
Nick
