Pierre Reveilles
New Member
- Joined
- May 24, 2022
- Messages
- 1
Hello,
I recently set up a Victron Energy power loop for my van.
I included in my set-up a lynx shunt 1000. After I had connected everything my Lynx Shunt seemed operational and showed on the system screen.
Up until recently when a green light started blinking rapidly.
The screen then stated that the shunt was no longer connected. Now the shunt has disappeared from the moniter diagnostics. I checked the connection to the lynx shunt and everything is well plugged in.
I turned the system off and on but this did not help.
I hope you guys can find a solution for me. It would be a great help to my business and will allow me to see my batteries percentage again.
I recently set up a Victron Energy power loop for my van.
I included in my set-up a lynx shunt 1000. After I had connected everything my Lynx Shunt seemed operational and showed on the system screen.
Up until recently when a green light started blinking rapidly.
The screen then stated that the shunt was no longer connected. Now the shunt has disappeared from the moniter diagnostics. I checked the connection to the lynx shunt and everything is well plugged in.
I turned the system off and on but this did not help.
I hope you guys can find a solution for me. It would be a great help to my business and will allow me to see my batteries percentage again.
