@wayne530 shared in this thread
diysolarforum.com
the link to the download of the Voltronic's Command Tool (http://ftps.voltronic.com.tw/C/Communication_tool-13A957D3F9AB41B59CCB/)
It allows basic RS232 communication to read out settings and tables.
The decription which @wayne530 shared in addition contains only two thread specific commands (QCHPT and QOPPT) , but it would be good to know all the other commands.
Does anybody have a manual for this Communication Tool?
![diysolarforum.com](https://www.mobile-solarpower.com/uploads/1/2/9/6/12964626/img-20190331-124124-456_1_orig.jpg)
LV6548 output/charger source priority timer settings
I'm not sure too many people are using this feature but after some back and forth with MPP Solar about odd behavior with the timer, I finally understand a little more about how it works and wanted to share it in case it helps anyone else. I am making some assumptions based on my observations -...
![diysolarforum.com](https://www.mobile-solarpower.com/uploads/1/2/9/6/12964626/final-favicon_orig.png)
the link to the download of the Voltronic's Command Tool (http://ftps.voltronic.com.tw/C/Communication_tool-13A957D3F9AB41B59CCB/)
It allows basic RS232 communication to read out settings and tables.
The decription which @wayne530 shared in addition contains only two thread specific commands (QCHPT and QOPPT) , but it would be good to know all the other commands.
Does anybody have a manual for this Communication Tool?