chicagoandy

I don't think there's any rule that says stranded wire must be in a ferrule in North America. I think of ferrules as helpful for...

Got it. So with two lynx distributors, you've got one set of wires landed in each. Distributor 1: A single 4/0 input from the...

Those are some impactful upgrades. I assume you didn't see any more hot connections? What are the amps on the mega fuses in the lynx...

Ok. So I've figured out what my network problem was. The Tigo was still getting an IP address on its wlan0 interface and its eth0...

Most residential smoke detectors have interconnects, typically at 120v. The following products are simple relays that expose 120V when...

Thanks for taking the advice and following through.

just for clarification for newbies: AWG 1/0 is the same as AWG 0, which is one size bigger than AWG 1.

Your Multiplus can pull 3,000 watts. Divide that by 12V and you get 250 Amps, just for the inverter. Add additional amps for your...

You lost your NUT, or you are a nut, or something like that ... Oh the humanity... soon cats and dogs will be sleeping together.

I am totally aligned on 'cost engineering' whenever possible. I will note that Current Connected right now has 350Amp T-Class fuses for...

That's a lot of assumptions to trust your house on. To save how much money? How many fuses have you bought? Y'all can do what you...

I have zero doubt that it's only a matter of time. But even if they're not fake, how to does one know they're not factory rejects...

Yeah, there's a lot of fake fuses out there. Not sure I'd be buying any life-safety critical components on Overstock. Or AliExpress...

Here's a good thread on tank sensors for Cerbo GX...

Interesting site, great prices on the MRBF, but very expensive for the class-t. Thanks for the tip.

No.

Current Connected site clearly shows you want the Pytes if you want closed comms with solark as a supported configuration Sol-Ark will...

.deleted.

Thanks! They do not make parsing these documents easy for non-professionals. It intuitively makes sense that lower voltages would be...

It isn't technically missing. Lowercase v indicates volts AC, while uppercase V indicates volts DC. Same with current - i is AC, I is DC.