Xiphiar
New Member
- Joined
- Jul 22, 2022
- Messages
- 2
I have a 5kwh 14s battery using a Daly 14s 100A common-port BMS. I accidentally left an extra load on one night that drained the battery, woke up to my 14s battery at 25v. The BMS should have a low voltage disconnect, could a few watts of solar charging on the common port could allow enough output to drain the battery?
I'm really trying to figure out the best way forward to protect my battery, not sure if I need to replace the BMS (potentially with a separate-port model), or look into an external solution to prevent over-discharge. Any insight or advice is appreciated!
I'm really trying to figure out the best way forward to protect my battery, not sure if I need to replace the BMS (potentially with a separate-port model), or look into an external solution to prevent over-discharge. Any insight or advice is appreciated!