Offgriding

Do you Iike/ recommend the touch screen?

Thanks for the photos. I'm looking forward to testing the jk. Do you use the switch to activate them?

Thanks everyone for all your replies and advice here. Skypower, you read my future correctly. I have a jk inbound. 🤣 If anything...

Quick update. The app connection issue seems ok now after shorting two pins as described in another thread. Pic below The discharging...

Which Daly BMS do you have? 12v "Smart" BMS: 24v "Smart" BMS lightboard: For the 12v model, you can easily make a reset button...

Pics below

Hi guys I watched the above vid which describes not receiving 3.3 volts across green and black wires of usb plug. Mine has voltage here...

I just connected the charging and bms connects to app straight away. It looks like discharge switch is on

Could you elaborate or further explain what you mean by "I get nothing". The BMS shuts off or its just that current doesn't flow to the...

If the inverter was pulling too much current and the BMS shut off due to Over Current Protection one would expect a warning code. If...

This is leading me to believe the battery is dead or the BMS is receiving no current from the battery. Checking battery voltage at the...

The biggest problem with Daly, and particularly from Aliexpress, is the high percentage of counterfeit products. I’m not saying you have...

Are you pre charging the inverter right before you connect? If not the bms might be going to over current protection. Do you see a fault...

I hope it’s something that simple

Hi Yes I am pre- charging the inverter. No fault alarm, no nothing. I might try reconnecting the charger to see if it will connect to...

Totally agree! I have 2 x JBD units. 1 58v on an ebike and another 12v on portable battery power station. I also have batrium on my 48v...

Hi The battery is definitely ok, as mentioned above the pack voltage is 13.75v. Wiring checked and rechecked. When the bms was...

I can't even get sufficient voltage to P- for the inverter to start or to power a small dc load.

Yes, sorry and thanks for your reply. The BMS disconnects from the app, the DL- number is still listed but won't connect. The voltage...

Hi all, This is my first post on the forum. Thanks for having me! Unfortunately I'm not a happy camper ATM. I purchased a Daly 150 amp...