MichSolar33
New Member
- Joined
- Aug 6, 2022
- Messages
- 3
Hello everyone. I am brand new to the forums and wanted to jump on and see if I could get you guys to bless my new setup here. Should be a fairly straightforward answer. I am getting very close to turning up a solar system which I built without an integrator, here are the specs:
48 x SunPower 435w Panels
2 x SolArk 12k Invertors
2 x Kong Elite 15Kwa Batteries
My question is, what is the correct way to wire the panels? Since there is a total of 4 PV inputs between the 2 SolArk units I was thinking it would go like this:
8 Strings of 6 Panels running in parallel = 4 total strings of panels
So each PV input would have 12 total panels connected (6 String + 6 String running in parallel)
(6+6) x 4 = 48
Am I thinking the right way here? Any guidance is appreciated.
48 x SunPower 435w Panels
2 x SolArk 12k Invertors
2 x Kong Elite 15Kwa Batteries
My question is, what is the correct way to wire the panels? Since there is a total of 4 PV inputs between the 2 SolArk units I was thinking it would go like this:
8 Strings of 6 Panels running in parallel = 4 total strings of panels
So each PV input would have 12 total panels connected (6 String + 6 String running in parallel)
(6+6) x 4 = 48
Am I thinking the right way here? Any guidance is appreciated.