I am using lifepo4 16s 48v 200amh with daly bms 200 ampI am very familiar with the growatt 8000. More so the DMV-mpv but other than that, they are the same.
We are here to help, just be patient and we'll try to be too.?
I think you will be happy with it.
What batteries are you using?
What is maximum amps in do you suggest for each pv input . I think my drawing is 6 panels with 18.36(2 × 9.18) for first pv input. I will repeat for 2ndCan I use just 1 mppt until I get my 2 other panels installed?
Ok changed out diagram. I think I have this correct nowLooks good, BUT, your add on later is not right. You state 70.27 is under 70?
More important is voltage. That part is covered by your red arrow. Anyway, don't go over on voltage, ever!!! Even when you get cold voltage rises. Something to check out and consider.
Yes, it is just a good idea to keep them close, balanced. Good practice to keep everything as balanced as you can.Can I use just 1 mppt until I get my 2 other panels installed?
Thank you, will do. Now to get 2 more panels and install.The amps are not usually an issue with the inverter. I know amps, watts and volts work together. I'm just saying you need to consider amps on the wire and the distance with said wire.
The inverter gives you the MAX volts and the total watts. I suggest staying at 80% of the max.
Like a trailer, just because it can hold 1500lbs does not mean you should, all the time.
Just my opinion.
I'm excited for you. Take your time and test every step of the way. It's easy to get the positive and negative mixed up for new installers.Thank you, will do. Now to get 2 more panels and install.
Thank youI'm excited for you. Take your time and test every step of the way. It's easy to get the positive and negative mixed up for new installers.
Just think of DC as twice what AC is.... dangerous stuff. And I'm NOT the safty police either.
Good luck. Let us know how it went. ????
Hi ok finally have growatt 8 up and running. I am using a gsok wall 16s 200ah 48 volt battery. I do not suggest buying one. The battery was great for 10 days then the led screen read out stopped working. The bms appears to be working. I get all read out on inverter in % now.I am very familiar with the growatt 8000. More so the DMV-mpv but other than that, they are the same.
We are here to help, just be patient and we'll try to be too.?
I think you will be happy with it.
What batteries are you using?