Anyone familiar with this unit, I could use some guidance. I ordered these panels from santan: (yes, the snail trails one!)
and I want to use this with a LV2424.
Everything is good, except for the slight over wattage, of 2250w.
These are used panels, so I do expect some loss of performance. But lets assume they all test to their rated;
I know some setups allow for oversizing the array as compared to the charge controller; the controllers just can't use the extra power.
Honestly, I get less than 2 hrs of peak production anyways.
and I want to use this with a LV2424.
- Rated Power: 250W
- Open circuit voltage (VOC): 37.6 V
- Max power voltage (VMP): 30.3 V
- Short circuit current (ISC): 8.85 A
- Max power current: 8.27 A
- Power Tolerance 0/+3%
- Maximum system voltage: 600V (UL)
Everything is good, except for the slight over wattage, of 2250w.
These are used panels, so I do expect some loss of performance. But lets assume they all test to their rated;
I know some setups allow for oversizing the array as compared to the charge controller; the controllers just can't use the extra power.
Honestly, I get less than 2 hrs of peak production anyways.