ricardocello

Got it, thanks. I did just hook up my critical loads panel so that will help I think.

For sure! She wouldnt let you leave hungry.

I love her voice and tone….…sounds like a sweet little old lady….

So, when you put the doggies in a 2P3S configuration like this, you can use the thermal image camera to make sure they are correctly...

with one Chargeverter being fed by a genny, max load on the genny will be 5000 watts. Which is pretty good charging amount, and will...

Four. Always on (load) plus three. They can also be inputs. So you can have main load, smart load, generator and ac couple solar, all...

"The MidNite MN15-12kW-AIO is an 11,400-watt system that features three MPPT charge controllers and three 120/240V programmable outputs...

Adam has been holding out on us! 😁 Here is his video of the new Midnite Inverter. I didn’t see it on here and gave him a day. Know...

In the breaker box (load panel, load center, whatever you want to call it): Look for two regular single-pole breakers typically next to...

Had that same thing in my previous house built in 2004. Bedrooms were split via MWBC. Friggen arc-fault MWBC breaker were like $375...

Wow, never knew they existed. Back in the 90s added some outdoor lights to the kitchen light circuit, so I wanted a GFCI breaker for...

Buy an old school bus. Paint It blue. Put some solar panels on top with some batteries and other Victron gear inside. Then, you really...

Borg had a greenish tint. Blue is better.

Yes, in my real job I sometimes have to worry about thermal interfaces and degC/Watt measurements to back out what ambient can be.

You bring up a good point, the delta T of the heatsink to the base of the FETs. Its higher then ambient but they likely already...

For engineering I use degrees C, for normal living I use F. Yes, there's a joke there somewhere... I measure the temperature of the hot...

How high? Those fans are great, but if ambient starts out high, the unit will be derated on current as shown above.

I don't know, but they shut themselves down if they overload or can't maintain an acceptable waveform due to excessive load. Disable...

There is a potential issue with the 2x120 on 120V circuits: If you have any Multiwire Branch Circuits (MWBC) in your house, you risk...

Bottom line for me: It made me laugh, and I needed that. Thanks