ricardocello
Latest activity Postings About Most reacted threads Most reacted posts
-
-
ricardocello replied to the thread Timed pump shutoff to prevent continuous running of well pump?.This thing looks interesting: https://www.amazon.com/Moen-900-006-1-Inch-Smart-Shutoff/dp/B081HT5LD6 -
ricardocello replied to the thread Timed pump shutoff to prevent continuous running of well pump?.No answers for you, but here are a few thoughts. Assuming this is a normal house well application, the Well-x-trol pressure tank acts...
-
ricardocello reacted to fmeili1's post in the thread 18 month DIY project finally done: 39kW inverter power off grid system with
Like.
2nd YEAHHHH... today I've just got the final approval from the local electrical energy provider :) :cool:(y) At 11am I've flipped the... -
ricardocello reacted to fmeili1's post in the thread 18 month DIY project finally done: 39kW inverter power off grid system with Like.
I had no choice but to install everything in the attached garage and that's the reason why I've done a huge effort to implement these...
-
ricardocello reacted to KellyDood's post in the thread 18 month DIY project finally done: 39kW inverter power off grid system with Like.
You have created A Thing Of Beauty (y)🏆
-
ricardocello reacted to timselectric's post in the thread When do you get rid of your packaging? with Haha.
As soon as it comes out of the box, the box goes in the trash. If I kept all of the boxes, I would have to build a separate building...
-
ricardocello reacted to timselectric's post in the thread MASSIVE Overpaneling -MPPT input current with Like.
Overpaneling only involves amperage. VOC is non negotiable. Never exceed it. Voltage is pushed. Amperage must be drawn.
-
ricardocello reacted to timselectric's post in the thread MASSIVE Overpaneling -MPPT input current with Like.
Already have. I ran for several months with 85a worth of solar panels connected to an 18a SCC. With no concerns or issues.
-
ricardocello reacted to Rednecktek's post in the thread 110v input into 220v circuit breaker box? with Like.
From what I'm finding, here's the trick to make it "Code Compliant" since you can't run 2 wires to the same lug: Option 1: Dual Circuit...
-
ricardocello replied to the thread High cost vs low cost fuses.I use MEGA for Inverters, PV, and Chargeverter from the positive busbar. I use Class T for Battery Rack, because that is where the real...
-
ricardocello reacted to hpeyerl's post in the thread Inspected and Operational. It's been a long journey. with Like.
It started here: https://diysolarforum.com/threads/new-system-layout-issues-qs.37210/ I have a few finishing touches still but I have...
-
The instructions for the HEPD80 actually give instructions for alternate wiring for “direct buss” right after the main disconnect. The...
-
ricardocello replied to the thread MASSIVE Overpaneling -MPPT input current.When solar arrays are shorted , they are supplying 0W. Because the voltage drops to 0 and power = volts* amps Only some minor heating...
-
-
You kinda answered your own question. You get what you pay for….typically. The vendors who have done and post test results will often...
-
My experience is mostly with ANL fuses. The cheap plastic bodied ones are trash, they almost always blow prematurely and the material...
-
Consider connecting the flying wire type SPD to any suitable existing 2-pole breaker, or two 1-pole breakers on different legs. In...
-
A fuse is more complicated than you're giving it credit for. That stamped sheet metal strip has to burn out under exactly the right...
-
Sorry I misread your post as saying that using a tandem breaker for the SPD. How do you wire it into your AC system without a breaker?
-
ricardocello replied to the thread Surge protection advice.Your post #5 shows a two-wire breaker, that is the right thing to do (and that’s what I did with a two-pole 20A)
-
Midnite Solar SPD. It takes up no breaker spaces. Comes in different voltages as well. AC, or DC voltage available. Edit: Signature...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
