Adam De Lay

In case you aren't aware Current Connected carries eg4 gear now: https://www.currentconnected.com/?s=Eg4&post_type=product&dgwt_wcas=1

Haven't yet, I took the unit apart completely on video yesterday, figure I need to wait about a week of having it scattered all across...

Found the issue with 88% charge. 1 of the batteries breaker was off, must have hit it when moving things around. Still issue with...

Jenna, at Signature Solar was amazing getting to the bottom of multiple issues: My 6000xp installed great, but the screws that secure...

Just for clarity. SRNE does not sell retail anymore. The 875 quote was a vendor that sells directly to consumer. There is more info in...

Taking DIY to the next level, now you ASSEMBLE it yourself too! Lol

Getting back on topic now…….

I admit If you are in a high snow area probably not a good fit unless you want to clean rows after snow. Especially if snow lingers for...

I have played with the unit a bit, started filming some stuff but got caught up on some website issues and upgrades that have been...

I believe NEC code requires DC inside a dwelling to be contained in metal conduit or equivalent.

Zero reason to use PV wire inside conduit or a structure...

10kW of panels is not portable. So I presume that you will have those fixed somewhere. Might as well put the Charge Controller with the...

Glad you decided to keep the 450/200. If you have a hodgepodge of mixed panels, having the 4 separate MPPT is another benefit I didn't...

I'm not sure what you're asking.

The 450/200 is a charge controller used to charge the batteries. It doesn't care what inverters are used. I have 2 Victron 5kVa...

Thanks, that's what I thought, I tend to over-think things so I thought I would ask the experts here. P.S. That EG4 is chugging along...

I've got a similar setup right now and I have both systems charging the bank of batteries. It's really no different than having...

Thanks guys! For reference, the file @EG4_Jarrett attached I'm assuming was from the 18kPV. Here's one for the 6000XP.

Good Morning! I am happy to announce that we have updated the list of available settings for End Users. We know that a lot of you want...

I just had my second 6500EX48 do this very thing after 1.5 yrs of operation. I was not home the first time that it happened (2P2), SS...