BarracudaBob

I have had it hooked up for a few weeks now and have no complaints about the VSD and the pump spinning up, slowing down, heat, alarms or...

Enjoyed the video. Thank You!

Nice breakdown of what goes on inside a breaker:

'Solar for Pool Equipment' https://diysolarforum.com/threads/solar-for-pool-equipment.62424/post-1009494

My little 3K (going with 2) need 80A each so this may be my best fit: Midnite Solar, MNEPV80, Circuit Breaker, 80A 150VDC, 1-Pole, DIN...

These instructions are for bending the input/out terminal https://www.altestore.com/static/datafiles/Others/MNEPV80-100_Instructions_V2.pdf

Just got this little gem in the mail. The idea is to use it for the battery, and as far I understand it takes a non-polarized MCB for...

Another Midnite vote here.

I just bought this one: 125A, 240V AC, 60V DC, 1 Pole, DIN Rail Mount Miniature Circuit Breaker, Trip Curve: C, UL1077...

Just use stellavolta (their site or amazon) and get a midnite breaker not sure what your amp is, I see a "125" midnight is like one of...

Let me know how that turns out. Now I want to build a load bank and torture test everything! The fact that it will do AC and DC is...

That looks scary! How much load draw are we're talking here? Curious, did you use ferrules and inspect the terminals for loose...

The cable was 4-AWG thin strand tin plated. It was torqued down as much as you could without breaking the plastic. It was still tight...

Was thinking of something like this for the battery to inverter breaker: MNEPV 80A Din Rail Mount Breaker To 150VDC Some #4 & #2...

Speaking of Circuit Breakers, I find myself looking for a good reliable one also. Installed for 11 months with no issues on a EG4 3000...

I can only give numbers for our 4 cell 300Ah Sinopoly LiFePO4 battery that has survived 10 years of full time travel. Two paralleled...

Most of open circuit LFP cell voltage variance is due to self-leakage current rate of given cell and is not much more than a few mV's...

Just to throw another one in the ring. The beatings will continue until accuracy prevails! In fairness this was designed for a 48 volt...

That is load connected AC PV. If you have excess production when grid is down, that is very bad. No where for the power to go.