Barridge's latest activity

lol so the SCC was still just wired to a single battery at 13.3v? Always good to measure the input voltages at the SCC to verify.

Ok guys I got it. My fault for not wiring it correctly. Thank you for your help! George

Thank you for your help!

It's still reading 13.3v...

Ok thanks I'll do it!

I have a Victron Battery Sense and it is reading the 24v system but the charge controller is not.

I have 4 batteries connected in a series.

Ok guys I'm here with another question! I just changed my battery bank from 12v to 24v because I just bought a 24v Victron Multi plus...

Thank you!! I will sleep better to night! One more piece of the puzzle completed!

I have 4 lithium SOK 280 AH, I was planning on hooking the 4 batteries in a 24V system. With 4 batteries I will have 2 series...

It seems then that I can use the same extension cord I'm using now to power my portable battery charger that goes up to 40A charger.

I see that now! Thanks!

Thank you guys for all your help! But now that I'm going to get a new inverter (Victron MultiPlus-II 24/3000/70-50 120V) with it's own...

Thank you!

The Victrons have a large surge capability beyond in this case it's 3000VA rating. That's why it's suggesting a 300A fuse and 50mm2 wiring.

Thank you Mister Sandals for your help. I have light usage here except when I run my vacuum cleaner once a year! Lol And I am going to...

Thank you Mister Sandals for bringing that to my attention. I was planning on using 2 gauge wire but I will follow Victrons wiring size.

Thank you Seneysolar! I have both the fuse and holder ordered! Have a nice weekend....

Well I bought a Victron MultiPlus-II 24/3000/70-50 120V (UL) to move forward with my project. So that leads me to what could be the...

I am located in upstate NY.