Bluedog225

Yes No OCP is required. But it is recommended to have a disconnect near the SCC for service.

Got it. Thanks Am I right in thinking that there is no OCP in this circuit?

I may expand to 4 arrays. Each the same as the two above. That is, each array will have two strings of 7 panels in series and those...

Size it for the "maximum fuse rating" on the solar panel stickers. Times 2 , for 2p.

I’m noodling a sketch of my system to prepare for installing my grown up arrays. I don’t know how to size my equipment grounding...

I just got a GE 550 dishwasher and ran it on the one hour cycle and only pulled 415 Wh and used about 5 gal of water. (connected to hot...

Also here: https://watts247.com/product/solar-panel-combiner-box-4-circuits-to-2/

Bump for op. Have you looked at the midnite solar stuff? I think currentconnected.com sells them.

Never heard of running a genny on white gas. That stuff stores forever, right?

When connecting a pair of MC4 (one will be male, one will be female), if you can't see the far end (of extension cable, PV panel, PV...

I use Brylcreem, and I'm sticking with it. A little dab will do ya! (y)

Can anyone interpret this? “Type III 105/.0100 Stranding” I’m guessing .0100 strand size. And I’m guessing that’s inches. Maybe 105...

Put a disconnect near the charge controller. Make the transition there.

I've used this, https://gregsmarinewiresupply.com/product/10-awg-tinned-marine-primary-wire/, with ferrules coming from the combiner box...

Which is the DLO wire? Sorry, I don’t follow.

I guess only a bit of this is needed? Splice it to the “regular” pv wire at the end of the run so you have the right wire for the...

West Marine has it in stock in their stores, if you have one nearby and need it now-ish.

Thanks. I’ll check southwire. I did find this at northern Arizona wind and solar. I think it qualifies...

I don’t think the connector victron uses is robust enough to properly grip solid or low strand count wires. South wire makes many #10...

Finally after 18 month I've completed the installation of my DIY off-grid system. It was an incredible amount of work, much much more...