Most reacted posts

Darn

ok i think (?) I fixed it I linked them to their own network so they can talk , now the charger that was low power output has picked up

thanks

you might can put the pump on a timer and have it only run during the day and not at night, but that may not solve your problem

He offered 250 with shipping I said I would pay 275 cause its very heavy and shipping is going to cost , plus take the 25 extra I offered to pay ( more than enough ) for the ebay listing and listed it as buy it now send me a link and I will buy it right away . then I have buyer protect . the 25...

Dude if you read my post I did order it LOL that was my point on the whole back order after you buy it statement

I agree to a point. It is for sale ,I just want to put the finishing touchs on it before letting it go. Being it's the 1st one ( not 1st one I made but for sale ) I want to make sure it's 100% and I don't expect it to sell right away in this market. And even though It is priced fair for what it...

So I tested battery capacity today, I got 511 AH when the inverter shut down ( set to 10.7 volts ) and my DC loads were still going. I did add a Victron BP-100 and have it set to cut off at 10 volts but I'm going to bump that up to 10.5 next trip in the side box of the RV. So I did get more than...

Thanks , im not quite done , but close

Hello all , I have a question about the Victron Bluetooth dongle. So right now my system has 2x Victron 100/30 charge controllers 1- 75/10 charge controller, 1-BP ( dumb one no Bluetooth ) 1- smart shunt. these are all the smart blue models with blue tooth, I do not have a central "hub" like a...

I've been load-testing it and this inverter is pretty impressive so far. I haven't loaded it to 100% but run it at 52% none stop for close to 2 hours. and its done well, of course, the weather here supports heat removal well

Please make sure the listing shows Ser # and list it as working condition . be very specific on details hope to see it soon

Ya my growatt 8kw inverter made a LOUD pop the other day but it was warmer that day maybe 25 to 30 degs .

Colorado, but I CAN ship within one state or so. I go back and forth to AZ a lot. I don't have a set price yet. but its going to be in the 18K range. everything is new, with no used parts ( not that I'm against that ) I have over 12K in parts in receipts. And a few weeks of labor . Im just at...

I'm not sure if this is allowed so if its not just tag and remove it or tell me and I will. But here is my FB page for more info on this unit. https://www.facebook.com/profile.php?id=100076405821511

Hello, I'm building a support system and need / would like some input . Hers the back store I need supplement support system for 2 other systems. I want to build a system inside my enclosed car hauler ( trailer ) that can be used as I need to support 2 other systems . 1) system 1 is a off grid...

was looking at this one : Growatt 8kW Split Phase Off-Grid Inverter | SPF 8000T DVM I figure if its 8kw thats 4kw per phase ??? or : Delicaquao Split Phase Solar Inverter 48V 6kW 120/240V Built-in Low Frequency Transformer Pure Sine Wave Inverter with Solar Charge Controller for Home Business...

How long have you had it ? I've been looking for good victron alternatives

in the old days, part of the proof you came up with an idea was to mail it to yourself so you have a date stamped on it without showing anyone the idea ( like on here ) . but that's just what I believed back in the 80,s doesn't mean I was right then or now LOL

by the way, did you file,? and have you publicly told anyone? if so Ib be dying to know what it was

well, I wish the maker of this transformer had more documentation available. Just found this video.. even tech support at signature solar had it wrong. I ask them could I not supply power N & L1 to get 240 output and they said no.. watch this video I found: " " ( copy paste the link did not...

So I've had a Eg4 charger ( well 2 of them ) for a while. one for a year-ish and the 2nd one I got 2 months ago. Now I am using my Honda EU2200 and an adaptor I made per the instructions provided for single-phase input. And it does charge with no issues as of the charging. I normally do not go...

Yes you are right..... I might have to look that way..

https://diysolarforum.com/threads/growatt-auto-transformer.47107/

I have been having an issue with this charger on my honda EU2200I also, I have found if I set the charge rate to 2 amps or less then start the generator, let it " Sync " or start charging then go up to 24 amps ( or whatever your can handle ) , Im at 7500 ft above sea level so 24 amps and my...

SO I have my Eg4 6000Ex hooked up and was able to down load the app and set up ( by Bluetooth) the setting on the inverter, I registered the account with the app and even got a message saying success. But any time I try to connect to the lux power with WIFI the app on my phone crashes . I even...

ok, have you thought about posting it on a auction site ?

this is what it looks like when under full charge : So I don't know if when the batteries are full is it disconnecting and showing some residual voltage on the panel side. makes no sense , either the panels work or they don't. they are name-brand panels also it didn't do this before syncing the...

I hear ya , I was looking for someone that could verify it would work in the setup I need but could don't find anyone to concur ( until I found that video , which by then was to late ) . Also when tech support said it could not be used like that... kinda did not want to risk the $$ to get...

click on their name next to the tread, you will have the option to follow or unfollow, etc.. Do me to try it and I let you know if it tells me you did..

im getting same fault but not connected to EG4 battery , so the above search is not applicable I just want to know what the error 61 is , being its not in the book and it is coming up

I just bought another one, but for selling items you basically will have more luck selling nd more people a chance to see it , because it gives the buyer payment protection incase the person that sells it doesn't send you what you paid for.. even more so when the person selling has a profile...

waiting on signture solar to answer been on holdfor 45 mins , I would do the call back option butfor some reason they come up as spam and my phone blocks them... I even added them to my phone book , but everytime I get a call from them its not the same # .. but I adjusted float up to match bulk...

from what I understand NO, but is desired. meaning if you are going to daisy chain them make sure they are all the same length and size. And at one end of the "Bank" has the pos lead coming off and on the other end have the Neg coming off. . But if you have a buss bar system it helps make sure...

fyi I just paid 500$ after tax and shipping for one. so there you go, you can mark it up to cover auction fees and still be cheaper that online solar stores

LOL we posted at the same time

I'm in a very similar boat , building a trailer mounted system ( enclosed car hauler ) to power " just the well " and when I'm visiting the cabin it will also supplement power to my RV which has its own system. I am looking for a 48 volt inverter , split phase low frq that can handle the start...

LOL , when you post on a website that's an invitation for people to look and comment. you never heard of window shopping, besides your ad looked a lot like the one I sent you a link to... and you are very defensive ... almost like you've been caught

me too, i never got a notification so I guess someone could follow you and you would not know , but really who cares not like they can get your personal info ,etc

what if you are using a single phase 120 volt output generator? Can I run the 120-volt output of my generator into the transformer ( growatt ) and get 240 output ? ( like on the outback auto former 240-x )

I figured that much, makes sense that your splitting your output over 2 legs. My concern was, after watching videos of this transformer, people using it to split a single 240 down to 120. I wanted to make sure that when I connect it to single-phase 120 it did not split it into 2 legs of 60...

Hello, a few questions here regarding the low voltage cut-off. I have searched this forum and it is discussed but not at the level I'm looking for. So my 1st issue/ question is my EG4 6500 Ex has a value to set low voltage cut off from 42-48 . the problem is my trophy battery at 48 volts are...

It's not that I didn't trust you. I was looking for someone to explain it I.E. = L1 is input 120 volt to transformer and N in N input to Neutral spot , then connect L2 from the transformer as one leg ( L2 ) and the L1 line as the other leg = 240 Then when I got tech support online and they...

PS I sent the video link to the tech support person I talked with , not as a I told you so, but more of hey maybe something you should know ( to help others )

post pictures if you can or a diagram

you don't need a fuse between batteries, but you should have one ( neg leg preferred ) leaving the batteries.

update: I tried my pulsar 3700/4500-watt generator, at first did not sync, then I applied the 500-watt light bulb to another generator outlet, it locked/ sync in and sure enough started to pass thru and charged battery , I had the charge mode set to 10 amps ( as for the honda 2200 which by the...

BY the time I paid Amazon, with free shipping... it only ended up being about 150$ more for the Victron I am kind of partial to the Solar Edge, I like that it has a temperature sensor.

You capitalized WE, which mean you are raising you voice. ( I capitalized WE ,,,, ok ) oops ill watch that You FYI like you think the person you are talking to is stupid. ( Maybe ) And I still think you are the same person as other thread and if anyone buys from you good luck to them

The pump is 850 ft in the ground so not replacing it, I can say that I can start it fine with a honda EU 6500 generator. Im not at the property to run a surge ( amp ) test on it. As Im out of town working. Was looking to order something soon as prices are going up on everything. I do have an...