I used 3 different QR code reader apps, and all come back with no matches. Not very impressive. :rolleyes:
I can only speculate it is the newer model since I don't have option 24...
A follow up question if you don't mind... If I implemented what Chris did, Would I connect an additional...
I really appreciate you folks tracking this down!
ChrisG states that "when I jump the neutrals AC input and AC output on the growatt," ... What does that mean exactly?
I have a plate/sticker on the side, but the model number is nowhere to be found. My SPF 3000TL LVM-24P is about a month old...
Hello!
I was going to charge the Tesla with the Growatt off grid system , but the Tesla Mobile Charge gave a Flashing red T on the charger. This means that "there was a ground fault circuit interruption due to an unsafe current path."
I purchased an outlet tester and indeed the tester...
I recently put together a system (see image) that has 5Kw of storage. It has been working dehumidifying the garage. The inputs and outputs to the Growatt inverter is a heavy duty extension cord I cut in half.
When I plug in the Tesla mobile charger , I get a flashing T. This means the...
I was getting ready to install a second string to my Solar array and I recalled reading that I needed to fuse between the strings.
The panels will be 3 in series with two parallel strings. The Vmpp for the panels are 33.12 and Impp is 9.36. If I do need fuses, what size? 30A?
I also read...
Hello,
Attempting to export the data from PVkeeper results in an unhandled exception. No data is exported.
It is nice to see realtime results, but I can't export the history. Is there a solution or an alternative data logging option?
Thanks!
When I try to
Hello,
I need some wires to go from the panels to the CC in the garage. The ultimate configuration will be 3s2p... Each string will be ~100 volts @9.3 volts. Two stings should be ~100 volts @18.6 amps.
Would the attached link be a good choice to go from the panels to the CC...
I think my best course of action is to start by adding one panel to the charge controller. It is a 24V system and the VOC is 40 per panel so that should work. The goal is to have a 3s2p configuration.
Hello!
I picked up a half dozen of these panels today. The voltage measures accurately , but there is no amperage... Is there anything special about these panels?
Would this be a good choice for pre-charge?
https://www.amazon.com/Wirewound-Resistor-Aluminum-Chassis-Electrical/dp/B08HYZV3DW/ref=sr_1_4?dchild=1&keywords=25+ohm+50+watt+wirewound+resistor&qid=1634119725&sr=8-4