Most reacted threads

Hi, anyone know what settings need to be changed / adjusted on the DEYE String Inverters when AC Coupling via the GEN Port. The manual isn't very good at explaining things. My main concern is the "RUNNING PARAMETERS" in the user manual page 35 (3.6kw SUN-3.6-G04-AU). My problem so far is the...

I am trying to figure out if a Pylontech battery kit with female Radlok connectors will fit onto a 48v Lithium battery with Phoenix male connectors. Does anyone know if a Female Amphenol Radlok connector will mate with a Phoenix Male battery connector both of 120 amp size rating. They appear to...

Hi all, I am having trouble saving charge voltages and amps in 5k SG04LP1-AU Hybrid Inverter. Process: From Battery Settings I select Use Battery Voltage and save. I then return to Battery Settings and input the Float 54v, Absorption 54v and Equalization (set to 0) and save parameters. I then...

Hi all. Does anyone know the correct settings for the HRESYS Lithium battery (VHR TL48100LFP-3U 48V100Ah). I know the charging specifications etc but do I need to use the correct code for this battery. It does not show up on the Approved Battery List although the documentation from HRESYS says...

Hi all, I noticed on the DEYE 5KW Hybrid Inverter, the Float Voltage is set without the charge Voltage being available (Use Battery V Mode). I assume the Charge Voltage and Float Voltage are the same with less current output on the Float mode. Can someone with DEYE knowledge please advise if...

Hi guys, I would like your thoughts on this wiring diagram for a changeover switch. Instead of changing 3 live and 1 Neutral, can it be configured to change 2 live and 2 neutral wires to run 2 appliances. There is no continuity between poles. Its just an idea I had to run 2 air-conditioners from...

Hi, anyone know where I can purchase a Raspberry PI 4B 4G from to use with Solar Assistant. I am located in Australia. Am willing to buy overseas as it seems impossible to buy in Australia Thanks.

Hi everyone, can anyone who has knowledge of this inverter point me in the direction of the user manual and installation manual for the 5KW 04 AU model. I can find the older EU model manual but not the new 04 AU model. I believe this inverter is still low frequency, correct me if I am wrong...

Hi, i have a Sunny Boy SB1700 Grid Inverter approx 12 years old. (Installed 2011) It has 10 x Suntech STP190s Solar Panels. The inverter is displaying a fault saying "Waiting". I noticed the input DC voltage at the inverter is 170VDC. (Confirmed with a multi meter) The specs on the panels say...

I have 2 48v Lithium Battery rack mounted banks connect to Deye 5kw Hybrid inverter in Lithium Mode. The BMS is correctly communicating with the Inverter. My problem is, late in the afternoon the Slave battery is taking the load and the Master is in Idle Mode. In the morning the Master has gone...

Anyone had experience with these Chin hybrid Inverters. They seem to be ok based on the specs and reasonably priced. Anyone...

Hi everyone, I am looking for Microinverters to suit 140 cell panels namely, Trina Honey 370 and Trina Tall Max 450. I would like to use DEYE Microinverters but I dont think they are compatible due to panel cell requirements. Any advice or recommendations would be appreciated. Regards, Max

Hi all, I want to import a 5kw inverter from China through Alibaba. I was quoted a good price but was then told I needed a wooden box for extra protection for $100USD. This increases the weight from 21kg to 40kg which doubles the shipping cost. Can anyone with previous experience please advise...

Hi everyone. Has anyone dealt with this Aliexpress company before. There prices seem reasonable and have mostly good feedback. They are offering 16 x 200ah Lifepo4 batteries for $1780 AUS including shipping. They are supposed to be (voltage, capacity, and resistance matched). Any thoughts...

Can anyone advise if the Deye String inverter can be AC coupled from the GEN side without the GRID connected to the Hybrid. I assume the Hybrid will sync to the String inverter instead of the GRID. Please correct me if I am wrong. (Micro Inv Input: To use the Generator input port as a...

Hi, anybody familiar with this BMS command. I have 2 Lithium batteries in parallel and on the inverter BMS display it says Request Force Charge on 1 battery. Can someone advise what this means. I noticed 1 battery has slightly different voltage than the other one. Any advice appreciated. Thanks.

Hi all. I am setting up Deye 5KW Hybrid Inverter and connecting a HRESYS TL48100LFP-3U 48v 100AH lithium battery. The battery is brand new and been in storage since shipped from chin. My concern is that the battery is only showing 46 volts and the cut off voltage of the BMS is 41volts. Will I...

Deleted.