Most reacted posts

So it would be better to only have right now 2 panels in series so when I have the 4 panel I put them in 2s2p

I put everything as you say and send you photos thanks you so much u have been my guardian angel hehehe a big thanks really. A question can I switch the green and the white I just ask so I don’t need to cut off the o-ring adapter that I put on the white cable at the inverter Ac output

I just disconnected one of the panels and let only the other 2 in series until tomorrow thanks so much and today I noticed what you say that it would generate less power. I notice that in the morning and before 12pm that the 3 connected generate les than the two I have connected two days before...

This is the machine and this outlet is the one who provide the output in which the plug is connected to the ground and live of the house and the second outlet is the one that’s it’s connected to the main meter breakers so it provide the main grid electricity to the inverter with the plug

Correct I put it on solar panel priority mode so in the day it’s use the solar panels an at night the main grid. I have it with 4 LiFePo4 12 volts batteries in series to obtain the 48volt the inverter need. The off grid inverter of you have the AC input for the main grid

I do something similar in my house I put and off grid all in one inverter controller to have the input from the main grid from the breakers panel in the main meter, then I disconnect the cables that’s goes from this breakers to power the houses and I connect those cables to the inverter output...

Ok perfect I would do everything and show you when I finish thank you so so much you have been my guardian angel :) thanks really

Even if It never get more than 145V ? And what would mean that the mppt range it’s 60v to 115v

How can a connect an all in one unit directly to my house do I need a transfer switch or what I have a srne unit of 6000 watts with the Ac input, Ac output, battery input and solar panels input but I don’t understand how can I connected to the house using the Ac input so it would take power from...

So it would be better to let only two panels in series and when I have the 4 put them in 2s2p and what can I do if I have 6 panels in the future

This is the Ac output if I put the white as ground in the inverter at the other end of this connection do I put the ground and neutral to at the ground/neutral bar as like the Ac input or I put the black with the black and the neutral with the red and the ground to the ground bar

like this

I have 4 battles of 12v connected in series to obtain 48v everything its been almost perfect for a few month but recently at day the batteries work great but at night the console say the batteries are at 0v and when i check the batteries individually 3 batteries have the 12volt but the battery...

I put one of this plastic or you think that I should buy one of the copper ones like this one

Use an all in one charger controller and inverter it’s so much easy

I’m selling the renogy BT-2 Bluetooth module for 34 shipping included it’s new I never used it because I bought it thinking it would work with my machine but it dont

Yes they are lithium batteries and 3 of them always say 11 to 12 volts but one say negative 36 i read something about reverse charge at that’s why that battery say negative 36 because its the the voltage of the other 3 batteries 3x12= 36 but I don’t know why this happened and even if i change...

the yellow cable that’s goes from the outside plug to the machine it’s the AC input and the red cables that goes from the machine plug to the cables that supply the house are the AC output the cables that are connected to the AC output they are not connected to the main grid. so the connection...

I don’t think that possible because they are in series connected

That show 12 volts if i test them together 3 say 12 volts and one -36 and if i disconnect them 3 still saying 12 volts and the other one say 0

This only happens at night because in the day they work perfect

.

No because I even turn off the breaker on the outside so everything it’s without energy from the main and even if I turn off that breaker but I leave the Ac input connected it’s gave me the error the machine only work well if I disconnec the Ac input. It’s is possible that the problem would be...

Tomorrow I would have 4 so for the moment how it would be the best configuration for this four I have it on the roof and I they would be two oriented for the south and two oriented for the north

That’s why I’m so confused because in the store they told me one thing but when I read and try to inform my self I see a totally different thing. Tomorrow I would have 4 panels what would be the best configuration.

I would have 4 panels tomorrow what would be the best configuration for this 4

Something like this for the 4 solar panels array

Something like this for the 4 panels array

Everything work great you are a genius thank you so so so so much you know the funny part of this that I’m an idiot and I pay for an electrician to put the Ac input outlet the one that is on the main grid outside and I pay for a bad work so he just see my stupid face and do a shit of work and...