EastTexCowboy
Latest activity Postings About Most reacted threads Most reacted posts
-
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.I went ahead and ordered 3 of the 1000v. They're doing the spray foam on the shop won't finish today so they won't be back until... -
EastTexCowboy reacted to timselectric's post in the thread Here we go again - upgrades plus new install with
Like.
Yes, the DC loads panel. And it has its own main breaker. That's what I use for the PV disconnects. But I think mine are 1,000v... -
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.You said you had a breaker on each load (inverter, DC panel). I had to reread it. Sounds like you meant the breaker panel itself. I...
-
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.Which breaker are you using on the load from the panels? I've got some from Amazon on my original system and they're still working fine...
-
EastTexCowboy reacted to timselectric's post in the thread Here we go again - upgrades plus new install with Like.
I have one bank. A breaker on each source (battery, charger). And a breaker on each load (inverter, DC panel). The only fuses in my...
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.No, I was just putting one on each run to the inverter. If I do a single bank that means a single fuse. On my home system I have three...
-
EastTexCowboy reacted to Zwy's post in the thread Here we go again - upgrades plus new install with Like.
Are you putting a Class T on each battery pack?
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.I've gone back and forth on that. I'm inclined to try it that way. I can always change it later if I have any problems. It will sure...
-
EastTexCowboy reacted to LydMekk's post in the thread Here we go again - upgrades plus new install with Like.
1 bank only. Do not split it.
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.That's exactly what I ordered on the bulb. I wish I had found the socket with the bracket. I have some regular sockets so I'm going to...
-
EastTexCowboy reacted to Zwy's post in the thread Here we go again - upgrades plus new install with Like.
It never notified me so missed this post. I used a 48V forklift bulb. This is the socket.
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.Agreed. But they do make a nice switch. Only two of these have them. I have a couple of T class fuses I ordered specifically for...
-
EastTexCowboy reacted to SparkyJJO's post in the thread Here we go again - upgrades plus new install with Like.
Yeah but MCBs are not worth anything in a short circuit for LFP. They will cut a few hundred amps if they trip a simple overload (but...
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.The top two have breakers. Ordered the cells and cases at different times. I don't trust the breakers for protection but they are...
-
EastTexCowboy reacted to Quattrohead's post in the thread Here we go again - upgrades plus new install with Like.
Those batteries have breakers in them, looks like it. Why not split the difference if you want and run two batteries into the first set...
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.I may can do something like that. And I said 2/0. The main cables are 4/0. Thanks!
-
EastTexCowboy reacted to SparkyJJO's post in the thread Here we go again - upgrades plus new install with Like.
Breaker or fuse off each one (properly rated) to a bus bar right there, then a single cable run from busbar to inverter.
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.Thanks! I feel like I'm slowly getting better at this stuff. But like the joke goes, I'm not a real electrician. I just found this hat...
-
EastTexCowboy reacted to blrmaker's post in the thread Here we go again - upgrades plus new install with Like.
Clean!
-
EastTexCowboy replied to the thread Here we go again - upgrades plus new install.Getting closer. Got all the panels installed including cabling and conduit down to the disconnect. Spray foam tomorrow then finish up...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
