Have an Epever 30 amp charge controller with 600 watts solar panels but am getting conflicting information from the Epever Data sheet it reads: "Max Solar Input Power 390W (12V)" but further down it says
"Solar Panel Max Input Power 500W -1000-W"
So...which...
Have new BB 100 Ahr battery, started at solid 14.4 volts now running off of battery for past 3 hours pulling a total of 60 watts 0.90 amps or 20 watts per hour at 0.30 amps per hour at 117 volts and battery is already down to by 30% to 13.2 volts, at this rate it won't make it through the...
Been trying to get a response from BB support a week now, you used to calling and talk to a support person right away but now it's " leave a number or email us and we'll try to get back to you" am waiting for RGA for defective battery... phone, email, message. . .nothing.
Due to their silence I...
My new Battleborn 12 volt 100 Amp battery keeps kicking my power inverters Over Voltage shutoff safety refusing to let them function with battery at full charge and as low as 30% charge, two inverters over voltage protection both show 15 volts but the one that worked showed over voltage...
Have been running a 30 amp Epever MPPT charge controller on my 600 watt 12 volt solar for several years but see 60 amps is now recommended,
just wondering if the performance or increased output would be worth it?
Have been looking at increasing battery capacity and hoping I might be able to get a Chins or the like to run with my Battleborn, unfortunately if you wire them together (series or parallel) BB said first problem would be a BMS mismatch and second you would void your warranty.
I want 300 ah...