Recent content by feverdog

Yeah, it seems as though this is a very common problem that I'm sure happens to every unit. I am very disappointed in EcoFlow. They had to know this problem existed, and if they didn't............why not? And where are the SoC reset directions in the manual??? They aren't there. You have to...

(I also responded in the other thread) I tried this and my battery went from 19% to 24%, so hopefully that is a good sign. We'll see once it charges. Questions for you.......... What is your low setting for the battery to kick off? Mine is set at 7%. I wonder if that is a contributing...

Thanks, I will give that a try. Update on mine............I got mine replaced under warranty as it was declining further and further each passing week. Well, my new one isn't fairing much better so far. It seems to be degrading as well. Was good for a few days and then seemed to be losing...

Does anyone see anything wrong with this? With a 200W draw, I have approximately 8 hours of run time. So that would be about 1600 Wh. My battery is at 90%, so for a 3600 Wh battery, I should have about 3000 Wh available and yet I'm only getting 1600. Am I missing something?

Yep, I'm still creating juice..........just need to buy some tees to tie in the 4th panel. Thanks for the help!!!

Hey, Captain Obvious..... Ok, so yeah the generator specs say 11-150V. The panels say 37.6 V max power so I must be creeping right over the limit. So, is it just as simple as getting a couple of tees to run 2S2P then?

I just bought a 4th 24V/200W (Rich) panel for my EcoFlow Pro generator. Everything is fine with 3 panels, but if I plug in the 4th (in series) I get no solar input. I know the new panel is good because I can add that to the trio and it generates fine. Add a fourth, and nothing. I know the...

Tech support has finally proclaimed this is normal behavior. Sorry for the late response. The minimum DC input for the Delta Pro is 40W, so if the input is under 40W then the unit would not recognize this input so it shows zero input, but since you try to plug the panel to the it, the unit...

Does anyone else have one of these? I'm new to solar, but so far I'm pretty happy with this. My two big complaints.........the documentation is very inadequate. I was expecting a pretty comprehensive manual, but all I got was about 8 pages of usable content. Only some of the features are...

I guess the main thing I was looking for was affirmation that that will work. Not sure why it wouldn't, but never hurts to ask, I guess. I didn't want to buy a 400 dollar switch and find out I didn't think of something. Did you install yours yourself?

Novice here...... Wonder if I could get some advice for installing a transfer switch. I have an EcoFlow Delta Pro solar generator coming and wanted to tie it to a few circuits so I can use it for everyday usage. https://ecoflow.com/products/ecoflow-delta-pro-portable-power-station I was...

Well, I feel stupid. I've had this panel sitting around in the box for about 2 months. Took it out and hauled it up to my 2nd floor deck to install my panels, and noticed it looks like it is shattered inside...............once I bolted them all together. Will this work or am I screwed? I'm...

Newbie here. I bought a Delta Pro Max and I'm trying to get wired for it. I bought 3, 200 watt rigid panels from Rich solar and some cable to run it in the house. I bought my first 10 ga spool. The wire was about half the diameter of the wire on the panels and too small to make a tight seal...