diy solar

diy solar

Most reacted threads

  • First thread not showing

    I posted my first thread to the diy solar general discussion category yesterday, but I can’t find it. It shows in my profile, but I can’t find it in the forum. What am I missing? Thanks!
  • Tapping 12v from 48v cells with Active balancer

    I will probably catch flack for asking this, but if you have a bms with an active balancer on a set of cells (48v 16s prismatic cells in my case) why can't you tap off of 4 cells to get 12v if the bms is going to keep the cells balanced? I am guessing if the current draw is substantial the bms...
  • JK BMS System log cleared

    Hello. I have a Jk BMS on a 48v pack. I think there may be a bad connection somewhere as the pack keeps shutting off randomly. I thought that it was a loose connection on a cell and I went to the system log to see what alarms had occured recently and the only thing on there was the initial...
  • Ant bms and display connecting

    I bought an ant bms and an lcd screen. I have the bms up and going and can configure it via Bluetooth app. However, I don’t see any way to connect the lcd to the bms to get the cell readings and info. I can get the lcd to power up but it seems it has uart connection (I thought it was...
  • 48v Lifepo4 pack charge 12v lead acid

    I read some places where this will work ok and others where it will not. Can I use a dc converter that converts my 48 nominal lifep04 battery pack to around 13.7v and connect that to a lead acid battery to maintain a charge. Will this work? I am sure that a charge controller is "better", but...
  • Considering DIY Long distance from panels

    I have a house that sits about 400-500 feet from an open 1 acre field. I live in area where (as far as I can tell) does not offer net metering services. I use approximately approximately 40kwh - 50kwh per day. The house is surrounded by trees and I would prefer not to add panels on the roof...
  • DIY pack tripping bms

    I have been reading and trying to do the best I can to understand lifepo4 cells. However, I’m stumped. I have built another lifepo4 105ah pack with eve105 cells. 48v 16s. Data sheet...
  • Advice on changing voltage/battery type of system

    I have had an off grid system on my dock for the past couple of years. It has always been a 12v system in which I have used a deep cycle lead acid single battery (100aH). I have a Harbor Freight 100 watt (4 25 watt panels in series) and another 100 watt single panel wired in parallel to the 100...
Back
Top