Recent content by GGameBoy

Can I add these habf terminal fuses to the bus bar and remove the breakers? Or is there a better option? A better option for the money?

ok i will look into those fuses and the double pole solar disconnect. The heat shrink with appropriate colors and bus bar covers. Thank you

ok my 150 amp breaker is on the battery. I have my battery, wired to a battery shut off, to my 150 amp breaker, then to my terminals that the bus bars connect to.

I dont know. I will assume it does not. I will add one. 2000 watts / 24 volt battery is about 83 amps. So a 100 amp breaker? I do have a 150 amp breaker on the positive terminal of the battery. Does that change anything?

Ok I have the bus bar covers I will put them on. I appreciate it.

Ok I will get the appropriate colored heat shrink. I only had black and it ran out midway. ill order more. To my understanding the solar charge controller solar cables are both 10 guage. I used the standard outdoor mc4 cables to attach to the solar charge controller but that stuff does not bend...

Ok I will fix that

Ok I will get more shrink wrap. I use a 150 amp main breaker on the battery positive like the 50 amp one pictured coming from the battery positive from the solar charge controller. Annnnd that made me think i need a breaker/fuse to protect the 10 gauge grounding wires that connect to the...

Ok, I will thank you

N thats the other end of that same cable just resting there since its not connected to the battery yet. sorry bad pic

Anything blaring in ur face that’s a safety hazard? This is the electrical set up that the 24 volt battery will rest underneath. wire is 4 gauge, 10 gauge I think the blue cables for the ats is 16 gauge, and I used 2 gauge battery cable from Walmart that will attach this to the battery

Hi, I have a question reguarding this ATS Will Prowse reviewed a while back. The manual states the maximum current of ATS is 50 amps and 1200 Watts max load for my 24 volt Battery bank. Is this true? I dont understand the logic behind this bec the ATS gets AC power from the wall and 120 volt...

Hi, I am trying to get some feedback for an idea that popped in my head lol. I wanted a truck bed cover for my truck that I just bought but don’t want to spend the money for one. I also have 2 250 watt solar panels that will fit my truck like a tonneau truck bed folding cover. But it would be a...

Has anyone bought these? I was going to try to use these for a lightning McQueen toy car electric that my kids use as well as for a mx350 electric dirt bike. This would significantly increase run time I would think from the 7 amp he batteries led acids it would replace. But r the battery’s any good?

Hello, I have a 50 gallon plastic toolbox on wheels with inverter batteries and scc. My Giandel inverter mania says I need to ground it with a 14 awg cable. Is that required? Since the box is plastic? I’m asking bec my inverter has a “ol” code and won’t function. Manual says it’s a short or...