-
-
Uutkvols reacted to Luk88's post in the thread Few questions to those that made DIY batteries. with
Wow.
So, for those interested, after an almost full charge at 0.3C my cells did increase the pressure on the fixture quite a bit. How do I... -
Uutkvols replied to the thread NW OH DIY Roof Mount Solar.I love the durham cabinet. Do you know the model number by chance? If I expand my pack I would look at getting one of these- I love that...
-
Uutkvols replied to the thread Splitting Up My Home Power For Critical Backup - Opinions Please.I did the same sans transfer switch recently with a smaller panel and 24/3000 MP. Ran a few dedicated lines with new outlets/boxes at...
-
Uutkvols replied to the thread Faulty Smart Shunt?.They have so many detailed PDFs it is quite remarkable honestly. Will check it out. Thanks
-
Uutkvols replied to the thread Faulty Smart Shunt?.Looks like it has been throwing some odd readings a bit longer. The solid flat reading on the right is when I switched back to use the...
-
-
UMy Smartshunt has been working fine for a little over two weeks. I noticed sometime yesterday it began reporting widely varying voltages...
-
-
Uutkvols replied to the thread Sourcing a few panels.Thanks! great points --- I will add that column to the spreadsheet to make sure theoretically possible with the sq ft. After creating...
-
Uutkvols replied to the thread Sourcing a few panels.I will check them out - I had given up on CL after not seeing anything on there for a while. I don't mind driving to avoid the high...
-
Uutkvols replied to the thread Sourcing a few panels.East TN Yea that isn't a bad idea actually. Usually I only see national listings without anything local but there are a few on there...
-
UI put together a 24v lifepo4 bank with 304ah cells about a month ago. Victron 24/3000. I have it currently functioning as a UPS for my...
-
Uutkvols replied to the thread 2nd Buy from Amy Wan/Luyuan.Curious why most don't get the 304AH cells and instead go for the 280? Are the 304's just over inflated hype? They look to be the same...
-
Uutkvols replied to the thread Pre Charging before top balancing.Thank you!! I will follow this advice
-
Uutkvols replied to the thread Pre Charging before top balancing.I will switch to a larger gauge - so there should not be a risk for cell voltage going any higher than the set bench supply voltage? I'm...
-
UI have 8 EVE 304ah cells that I am in the process of pre-charging prior to top balance with a bench supply @ 3.6V, hovering around 7A...
-
Uutkvols replied to the thread Victron 24/3000/70 Guidance.Gotcha - I missed that part in the manual. The second output then is basically for an "optional" load that you don't necessarily want...
-
UAs often happens, my small project has turned into a much larger one. I originally was going to build a simple UPS for my server rack...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
