Most reacted threads

Is there a trick to getting the JK BMS to accept the voltage you put in for calibration. Keeps saying failed when putting in the actual measured voltage with calibrated DMM which is about 1.1v off from the BMS itself. Not sure if there is some magic to get this to work but I read another user...

Where can I get the latest English JK-BMS manual which has the added SOC settings for HW Version 11.XW & SW v11.288 Thanks

Hi, If i understand correctly the JK BMS LCD plug is 6 pin. K- , K+ (used for switch function), GND, Serial A, Serial B, & VCC 12v The 2" Display plugs in and gets power from the BMS via GND and VCC pin. The 4.3" based on pictures appears not to use the same GND and VCC 12v itself and...

Looking for new ESS-7.6 80V pack only, please PM thanks

Hi, looking to get confirmation if running JK-B2A24S in parallel will be an issue. First JK connected to first battery pack, second JK connected to 2nd battery pack. Both battery packs are high voltage, same voltage and same aH and will be individually charged to 80% SOC. Each of the JK...

Hi, is it possible to save the JK BMS setting to allow for switching between configuration on the same BMS. For example rather than go in there manually and change the OVP for example I want one config that is 3 and and that is 4? I don't see any option to export anything but I figured i...