hummmingbear

Odd, i don't see that option in the EG4 Monitoring Web Page for my 6000XP. Is there something I need to enable to see that?

Where in the settings for the inverter can you enable the ground neutral bond? I haven't seen this setting anywhere in the app. Is it...

This is an unfortunate default setting from factory, should be LA. Would save them quite a few CS calls I think if it was changed.

I agree 100%

I think you're right. What a mess! The manual should explicitly state that, or even better there should be a setting for battery...

Ok, looks like my network was blocking outgoing requests to China. I made an exception for this device and now I can get to the...

It's very frustrating, but it will be worth it once you get it connected. He'll help you out. Don't give up now👍

Could you send me a DM with the serial number of your Wi-Fi dongle, as well as the serial number and station name for the inverter (if...

I have again powered on the 6000XP with the dongle installed. Connected to the SSID which is the serial of the dongle. After I've...

That's exactly what I did before...I'll try it again thanks

Yes, connected to the dongles hotspot network, same SSID as the serial. What's the next step? I initially used the EG4 monitoring app to...

I have tried these steps, when I connect to the SSID of the device and go to 10.10.10.1 in my browser nothing loads. I've tried on...

Can you share how to "reset the dongle"? I can't get mine to connect and when I connect to the SSID and go to 10.10.10.1 nothing loads...