• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar

Most reacted threads

  • BMS OEM config file from JBD, needs updating

    First let me start by thanking this forum for giving me the "guts" (or one could say knowledge) to build my first DIY LiFePO4 battery bank. I built 2 banks of (16) 3.2vdc 302ah cells with a JBD 6S~21S 200A BMS with BT and heater control output controlling each bank. Everything was assembled...
  • Purchased from "BATTERY FINDS"

    After reading here on DIY Solar forum the proper method of verifying condition and then assembling a 48vdc battery bank, I have ordered the following from "BATTERY FINDS". I selected them over the "18650 Battery Store" because they as well have a US based warehouse (City of Industry California)...
  • Old DYI Off Grid guy but totally new to the LiFePO4 battery scene.

    We have had an off grid cabin going on 21 years. I started in 2003 using a Trace SW5548 inverter with 8x Trogan T-105 batteries and 8x 60w solar panels plus a Trace C40 charge controller. After 6 years the Trogans were done, so I located some even larger locomotive batteries from Dyno Batteries...
  • Do I fix my Trace SW5548 or purchase a new Victron Quattro 48/5000 or EG4 6000XP or a Growatt 5kW

    Well my SW5548 finally let me down after 20+ years of faithful service. My main suspicion is the buttons on the HMI or faulty. The interface window is full of just random characters and the relays are going crazy in the back. The unit is in pretty good shape as it did not get "smoked" with and...
  • Renogy vs Victron

    I need to update my old Trace C40 solar charge controller. My system will be 48V with LiFePO4 batteries and and currently only 1200w of solar. Which I hope to expand in the future to 2000-3000w. Renogy MPPT controller @ 140vdc 60a input 12/24/36/48 vdc output vs Victron MPPT 150vdc 35a or 40a...
  • Connecting a JBD AP21S004 BMS

    I have two 16 304ah cell banks that I had planned on connecting in parallel using two JBD AP21S004 200 amp BMS's for my Off Grid cabin. Please explain the differences or benefits (?) between the JBD AP22S004 "Balanced short method" i.e. connecting s14 through s19 to the #14 cell verses the...
  • Trace SW5548 miss reading battery voltage.

    I have had a Trace Engineering SW5548 installed at our off grid cabin and running continuously since first installed in 2004 so 18 years, no complaints about that. However this morning I find no power on and when I investigate the inverter has shut down when I reset she runs momentarily and then...
  • My off grid Joys and Curses.

    I have had an off grid cabin in the North Cascades of Washington state for 21 years and in the early days I had to lean in on my own mechanical Engineering degree to figure out everything from what equipment I needed, to how and where to mount the Solar panels. The online community has grown a...

diy solar

diy solar
Back
Top