Fantastic. I severed Mr. Green wire and the problem resolved.
For any interested readers... you only need to sever pin 6 on the wire going from LL-S to LP4. The LP4-LP4 is a normal wire.
Also, I noticed I had to "remind" my master battery that it was communicating on CAN/Lux and then the...
Mine is wide open. You might check yours. This is why I went through the pain of trying the wired dongle, which also did not work. SA is now working on an RS485 solution and I have been able to get data directly from the inverter as well. And I've been working with @solarhombre on getting...
Problem: Both the EG4 6000XP and 18Kpv wireless dongles are highly insecure, broadcasting an unsecured network and Bluetooth open connections. For connection to Home or Software Assistant, this dongle relies on a special "debug" mechanism on port 8899 to retrieve data, which are not open for the...
I just attached two V4 batteries to a 6000XP and they worked fine. That said, I did a firmware update on both before I did anything. I also went into the 'master' setting on the battery (set dip to 64) and ensured it was set to CAN/Lux. Both v4s are working and talking to the 6000 XP. Oddly...
It doesn't support the 6000xp inverter without using the very insecure wifi adapter, so I will use it as soon as they have an RS485 solution for monitoring :). Always broadcasting an unsecured wifi endpoint that anyone can connect and modify settings is a no-go for me!
My experience with Signature Solar so far has been very positive. That's with ~3 orders.
Order 1: Placed 14-Nov, Shipped 6-Dec. Equipment was almost perfect -- one bus bar spacer's had broken but was a super cheap replacement (less than $10).
Order 2: Placed 2-Dec; but changed my mind (wanted...
Support sales tax exemptions. I sent in my Texas sales tax exemption form (farm) and was told it does not apply to solar equipment. I didn't bother to argue, I just took my business elsewhere :)
Isn't one of the SA solutions to put an ethernet splitter in the line and then you can listen to the traffic as it passes through. Might be a way to get the data.
You can use the EG4 app with the dongle, but the wireless dongle is very insecure. It broadcasts an open network that anyone can join. The wired dongle doesn't allow local connect. So basically a security-oriented approach is kind of up a creek right now.
Nope. I beat my head over this one. It won't. And it is because SA uses LocalConnect (port 8899) to get the data. That port is NOT opened on the wired ethernet dongle.
Yeah, the battery size minimum is 3kW/h. @Ampster
"Energy storage devices that have a capacity rating of 3 kilowatt-hours (kWh) or greater (for systems installed after December 31, 2022)."
As for max @janderson:
"There is no maximum amount that can be claimed."...
It may be a DIP switch issue. I couldn't get my batteries to report when I had them in perfect DIP sequence (1,2,3,4)... I had to skip 4.. so my DIPs are at 1,2,3,5!
I have no idea why. But if I set the last DIP to 4, it stops reporting.
I have two LL-S and two LP4. Here are my settings...
It does not appear SolarAssistant works with the EG4 6000XP inverter and EG4 batteries an truly offline manner.
Has anyone successfully got this inverter communicating with SA *without network*? I saw something in the manual about a meter1/2 (page 25) but every wire pair I tried would not...
The downloads at EG4's website for this battery have the firmware zip file and that zip contains the instructions. I followed them and was able to update both my batteries.
The WLAN (hardwired) dongle does not support LocalConnect, which means SA does not work with it. I think SA is adding a item to their backlog to seek alternate ways of connecting, given that the Wifi approach is kind of a "debug" mode. For now, no SA for me until that is done.
So the wireless dongle has port 8899 open for local connect and (other) monitoring, but the *wired* dongle does NOT. EG4 folks (@EG4_Jarrett or @Markus_EG4) can this be enabled remotely or via a firmware update?
Ok, I finally had the time to get set up and try the above recommendations. Alas, results are still not successful.
I tried a cable with pins 1&2 and a cable with Pins 7&8 and went through all the SA battery options. I tried on both the RS485 port of the first battery and the second comm port...
Now for the next question. How does one get Solar Assistant to work with the EG4 LL-S batteries while keeping them connected to the inverter? The LL-S has two ethernet plugs above the battery terminal (and two below); currently the CAN port goes to the inverter. When I plug the RS485 one into...
Problem: Both the EG4 6000XP and 18Kpv wireless dongles are highly insecure, broadcasting an unsecured network and Bluetooth open connections. For connection to Home or Software Assistant, this dongle relies on a special "debug" mechanism on port 8899 to retrieve data, which are not open for the...