Most reacted threads

I built a solar power system for My full time RV, built around my 1300 watts of panels, they are 48v nominal, and I setup with four 100ah batteries wired in series for 48v. Sadly, this gives me 100ah at 48v instead of 400ah, due to my misunderstanding. Does it really matter?? I am using a...

We have two 220v deep wells, unsure of the pump specs, but I see they draw 1500-2000w when running. I understand they draw five times that when starting. I am having multiple alerts on my dual 6000EX setup about EPS Over Load. I'd like to find a Soft-Start for both pumps, assuming this...

I have been using this setup for the last three years with no issues: 2KW solar. 4800wh LiPO4, a Seperate MPPT charge controller, and a seperate 3KW inverter. Also a 48/12v converter. My question is, I will be doubling the battery capacity and the solar panels, and was thinking about going to...

Good morning! I have two 6000xp, 8 eg4-LL 48v batteries, and two panel arrays. The panels are only 4kw total, but voltage exceeds MPPT input, so it’s split. I had planned to put both arrays on the two MPPT on the master inverter, and same with batteries. Does it make more sense to divide...

I have a local vendor that is trying to get me to buy these as opposed to the EG4 48v/100Ah THere’s not really a compelling price difference and I can’t find much information on these batteries at least in the US. It seems they’re mostly popular in Europe and South Africa? Should I just stick...

I’m building the power shed with batteries and inverters down at the panel arrays, and want to push the 220v to the house from there rather than trying to push the DC from the panels that distance. Looking at around 200’. I’m using a pair of EG4 6.5kW (6500EX-48) bonded together for 220. What...