Most reacted threads

I have little room between the battery and the top shelf and the connector for the display it too high and wont fit. Has anyone found a 90 deg adapter for the display connector - Cable A to Cable B connection?

Hello everyone. I am new to LiFePO4 cells. My aim is to build a 12V house battery for my boat. I bought 4 cells 200Ah from BLS (supposedly Grade A). The cells have black coating not Blue and they are unbranded but built quality and QR code looks ok. On unpacking cells are a bit uneven with...

I am building a house battery for a boat consisting of 24 (280K) cells. It is a 12V system and onboard inverter is rated at 3kW so the max current is around 300A. I was looking at the JK smart BMS but the max current they have is 200A. Can I separate them in two batteries and connect them in...

My BMS (Bluetooth app) is showing a little discrepancy in the current reading. Charging at 9A it shows 9.3A on the app. Discharging at 7.6A shows -7.3A. Is there a way to calibrate it please?

I would like more info about the Max charging current on JK BMS. If it is exceeded does the BMS limit the current of cuts out charging?

I have Daly BMS with 4 cells for 12V battery. I am planning to install it as house battery on my boat however it is shutting off after around 2 weeks idle. It will need a little charging to turn On again. Is this normal for Daly BMS and is there a way to turn off this fault/feature?

I have built a new battery with JK BMS (B2A8S20P) and installed on a boat. Everything works fine until the battery is disconnected. On reconnecting battery, the BMS gives a SC protect error. I traced the fault to the Multiplus Inverter - if disconnected the BMS works fine. Tried switching...