nuke

Isn't that some app where you set the rates and its just displaying what you set?

I did not read your post because it was too long. I have 10 kW of solar, one SolArk 12k , and 20kWh of batteries and I can run my house.

Heck that's nothing. I run my house, power the neighborhood, mine thousands of Bitcoins, run an illegal grow operation, and still have...

I have it all connected and it works great. I disconnected the eg4 public cloud IP so I don't bombard their servers, but there's...

It's been 2 weeks with the new inverter, and everything is operating normally! It was a long and frustrating process, but we're very...

DC to DC is probably harder than inverting tbh

Maybe bus limitations somewhere - 250 amps is a lot of juice

I had a similar question earlier. I am not an electrician but I believe you'd either need to wire the load side of the 18kpv to a 125a...

EG4 and Signature have agreed to replace my inverter. I should receive the new one tomorrow.

No I'm talking about the NECs definition of a PCS. Look at the NEC 2020/2023

Words to live by.

It's adjustable on the 18kpv

Yep, same. I bumped up the PV start voltage and tada Note: This was a problem before FAB-1717 for me

If an inverter meets the UL1741 spec as a power control system then the 120% backfeed rule can be circumvented as the inverter itself...

Gen Boost

I'm not sure I follow - you're saying that with AC coupling, you can't use charge last with "seamless switch" because what? voltage changes?

Here is the Doc for Weather Optimization

I see them all. There are multiple reasons for not replying. 1. Someone else is already helping. (Doesn't apply here) 2. I don't have...

you could pop one open and see if the BMS is from a known mfg, and then go from there Or just open loop 'em and whatever

Thank you for the update.