Ok so rolling black outs in California. So we are going to put more stress on an already overwhelmed system by making everything electric. What a bunch of fools.
Well most internet routers are 12vdc So you could simply put a deep cycle battery or 2 and connect the router to them. For the laptops buy the car charger option for them and charge them off the battery.
When the grid comes on charge your battery.
You can use this. You can get it at any auto parts store.
CRC 3175 Battery Terminal Protector, 7.5 oz Aerosol Can, Dark Red https://smile.amazon.com/dp/B0013J7RAI/ref=cm_sw_r_apan_glt_fabc_YT63Q3CYTSPVYGTAC919
I just made a box from wood. When I put the end on and tightened it closed, it pulled the batteries tight together. You can turn the box upside down and the cells will not fall out.
I would recommend you predrill all the holes and assemble the box before putting cells in so you don't run a...
Elon could have built a battery company here in the USA for the 43 billion. But regulatory BS in the United States is a business start up killer. We want green energy but don't want to know how much green technology destroys the environment. And all the slave labor in China makes it more...
I agree there is a lot people can do. But you can't just turn the spigot off when the infrastructure to make it happen just isn't there. People don't like things shoved down their throat. Which is what is happening now. I would love to have solar and an electric car but the cost are...
Spend the money on the 24v to 12v converter. Otherwise you will unbalance your man 24v battery. That's the right way. To do it and put 30 to 60amp converter in. There is a lot to run off of 12v.
Here is one that might work for you.
US $97.71 50%OFF | EBC-A20 Battery Tester 5A Charge 20A Discharge Support PC Software Control E5BB Hot
https://a.aliexpress.com/_m0i4UHV
It's reviewed by offgrid garage
You should have these connected in a 2s2p configuration not a 4s configuration. 4s is to high of a voltage for your controller. Make sure you have correct wire size too. The panels only have 12awg wire.
I can see why they don't recommend connecting them together. The charge current the bms is rated for can easily be exceeded by in rush current from another battery. I think if you have 2 battery banks that are fully charged it would be safe to connect them.
Bad design:
If you design a system...
Good luck. Make sure you weigh them. Take pictures of all your test results. 2 more days on my claim with PayPal, with no response from the seller yet.
Now there's a seller with 4 - 320ah batteries for $150 with free shipping.
US $56.40 25%OFF | 100% New Lifepo4 320Ah 4-16PCS 3.2V Grade A...
For your HVAC a lot oh people are using mini split units with great success. They produce both heat and air. And are a lot more efficient then window units. Plus a lot quiter too.
Victron is good but a little pricey. Look at these 2 maybe a little more bang for the buck.
https://www.invertersupply.com/index.php?main_page=product_info&products_id=189717&gclid=EAIaIQobChMIkoK_rNGW9gIV6B-tBh0fnQXKEAQYAiABEgILz_D_BwE
https://powermaxconverters.com/product/pm3-24v-series/
58.4V 10A Charger 58.4V LiFePO4 Battery Smart Charger Used for 16S 48V LiFePO4 Battery High Power https://smile.amazon.com/dp/B07CXQBQ8D/ref=cm_sw_r_apan_glt_fabc_22XBQNQ09S09KZ5S1168?_encoding=UTF8&psc=1
So I tinker around with different projects and needed a battery box for 18650 batteries in a 7p4s ( could also make 4p7s ) configuration. I found I could make this pack with bms and it fit perfectly in a plastic recipe box.
Hope this helps someone out.
Index Card Holder 3 x 5 inch - Recipe...
Fusing is important that way if you have a bad cell it will blow the fuse and disconnect itself from the pack, instead of over heating and catching on fire. This is what they do on the Tesla batteries as well.
You have to turn it on in the settings. But it only balances when charging. So you'll need an active balancer. I added a 5a active balancer to mine, and now I'm happy.
I would capacity test each cell and find out their capacity. Then make 4 parallel strings 3 cells out of them, buy using the 12 best capacity batteries. Each string capacity should be very close in average capacity.
Assemble battery and charge. After charged connect cells back in parallel let the set overnight. This will let them all balance to the same voltage. And they should be on the same point of the curve then.
Yes you can replace the guts. About a 30min job. It's just swapping out 5 wires and 4 screws to do it.
I just did mine a couple weeks ago. Post the model number and we can tell you what you need.
This is the one I bought to replace my wf-8955.
WFCO WF-8950L2-MBA Replacement RV Power Converter Lithium-Ion Main Board https://smile.amazon.com/dp/B07TZNCFG4/ref=cm_sw_r_apan_i_H81EVSYRDAAKXGECAV4Y?_encoding=UTF8&psc=1